Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40B
The AirTAC Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.
- BoreØ32 mm
- Max stroke60 mm
- Adjustable range20–60 mm
- Adjuster threadM10×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40B
The AirTAC SDAJ32X60-40B is a compact double-acting single-rod cylinder featuring an external extend stop. An M10x1.25 adjuster screw lets you dial the forward end-position anywhere between 20 and 60 mm directly on the machine, eliminating the need for shims or part swaps during setup. Because the mechanism only restricts travel length, output force remains identical to a standard SDA of this bore, delivering 402.1 N of push at 0.5 MPa.
Built with a short riveted body, this unit saves valuable axial mounting depth where larger profile cylinders cannot fit. It uses a fixed NBR bumper at each end to decelerate the piston, which is not an adjustable air cushion. This specific SKU includes a male M10x1.25 piston rod thread and lacks a piston magnet, meaning it cannot accept magnetic switches without modifying the build.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40B Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 60 mm |
| Adjustable range | 20 – 60 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40B Is Used
Tooling Depth Calibration
Dial the extend stop from 20 to 60 mm via the M10 screw to set precise forming depth on short-run batches without machining new spacers.
Changeover Positioning
Hit exact intermediate endpoints during product changeovers, relying on the 402.1 N push force to shift lightweight jigs into trial alignments.
Variable Flap Folding
Adjust the mechanical stop on the fly for different carton depths, letting the fixed NBR bumper absorb the end-of-travel shock repeatedly.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40B the Right Cylinder?
When sizing this 32 mm bore, compare its 402.1 N push at 0.5 MPa against adjacent options. Stepping down to an SDAJ25 yields 245.4 N, whereas stepping up to an SDAJ40 provides 628.3 N. Based on the 402.1 N figure, a safe working load is roughly 241 N (about 60 percent capacity), translating to a vertical lift capability of approximately 20.5 kg with a 2:1 safety margin.
Choose this male-rod (-B) model if your tooling requires an M10x1.25 threaded attachment point, and select it when lines require frequent on-machine stroke tuning. Remember that a plain cylinder does not hold position on air loss or valve centering; the piston drifts. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 20–60 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M10×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40B FAQ
This 32 mm bore cylinder delivers 402.1 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum push is 82 kgf at 1.0 MPa. It features a PT1/8 air port.
The M10x1.25 screw mechanically shortens the forward stroke by up to 40 mm, setting travel between 20 and 60 mm; it does not alter force. This SKU lacks a piston magnet, so it cannot take a switch. You must order the -S variant to use reed or electronic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-40B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.