Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50
The AirTAC Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
- BoreØ32 mm
- Max stroke60 mm
- Adjustable range10–60 mm
- Adjuster threadM10×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50
The AirTAC SDAJ32X60-50 is a compact double-acting single-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can shorten the forward stroke on-site, giving a usable extend range of 10 to 60 mm without changing parts or adding shims. Because the adjuster only sets the mechanical stop position and not the piston area, output force remains identical to a standard SDA of this bore, delivering 402.1 N of push at 0.5 MPa.
This thin riveted-body design saves axial mounting depth where a larger profile cylinder will not fit. End-of-travel energy is managed by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for position sensing.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50 Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50 Is Used
Variable Length Gauging
Dial the extend stop between 10 and 60 mm to test multiple part lengths on a single fixture, using the 402.1 N push force to seat components firmly.
Rapid Format Changeover
Spin the M10x1.25 adjuster screw to shift the rod end position for different product widths without swapping out the entire cylinder body.
Trial Stroke Positioning
Set a precise intermediate mechanical stop for delicate probing operations, relying on the fixed NBR bumper to absorb the end-of-stroke impact.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50 the Right Cylinder?
When sizing this 32 mm bore, compare it both ways: stepping down to an SDAJ25 yields 245.4 N of push at 0.5 MPa, while stepping up to an SDAJ40 provides 628.3 N. The 32 mm bore offers a calculated safe working load of roughly 241 N (about 60% of its 402.1 N capacity) and can vertically lift approximately 20.5 kg with a 2:1 safety margin. Choose this model if your fixture requires frequent on-machine stroke tuning during changeovers.
Confirm your parameters: 32 mm bore, 60 mm maximum stroke, 50 mm adjust window, PT1/8 port, female M6x1.0 rod-end thread, and no magnet. Keep in mind the fixed NBR bumper only decelerates near the end of travel; it is not a lock. If your application must hold a load vertically without live air pressure, add an external rod lock or pilot-operated check valve, as a plain cylinder will drift when air is lost.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 10–60 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M10×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50 FAQ
This 32 mm bore cylinder uses a PT1/8 air port. It generates 402.1 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
The external M10x1.25 screw mechanically shortens the extend stroke by up to 50 mm, yielding a 10 to 60 mm usable range. This specific SKU has no piston magnet, so it cannot take a switch; you must specify the -S option for reed or electronic sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X60-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.