Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-20S
The AirTAC Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-20S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 55 to 75 mm on the machine — no shims, no part change.
- BoreØ32 mm
- Max stroke75 mm
- Adjustable range55–75 mm
- Adjuster threadM10×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-20S
The AirTAC SDAJ32X75-20S is a compact double-acting single-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you shorten the forward stroke on-site across a 55 to 75 mm window, eliminating the need for shims or part swaps during machine commissioning. Because the adjuster sets the mechanical stop rather than altering the piston area, output force remains identical to a standard SDA of this bore, yielding 402.1 N of push at 0.5 MPa.
Its short riveted body drastically reduces axial mounting depth where a larger profile cylinder will not fit. The unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-20S Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 75 mm |
| Adjustable range | 55 – 75 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-20S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-20S Is Used
Tooling Changeover
Dial in the extend stop from 55 to 75 mm via the R screw during product family changeovers, ensuring precise positioning without machining new spacers.
Flap Folding Arms
Apply the 402.1 N push force at 0.5 MPa to fold varying carton sizes, fine-tuning the mechanical stop on the fly to prevent crushing the packaging.
Vertical Lift Stops
Safely lift a 20.5 kg payload with a 2:1 margin, using the external adjuster to set exact upper travel limits in compact vertical elevators.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-20S the Right Cylinder?
When sizing this 32 mm bore, evaluate your force requirements against its neighbours. Stepping down, the SDAJ25 provides 245.4 N of push at 0.5 MPa; stepping up, the SDAJ40 delivers 628.3 N at the same pressure. This model yields a safe working load of roughly 241 N (about 60% of its 402.1 N capacity) and can vertically lift approximately 20.5 kg with a 2:1 safety margin. Choose the SDAJ32X75-20S specifically when an application requires precise on-machine extend tuning between 55 and 75 mm.
Confirm the 32 mm bore, 75 mm maximum stroke, 20 mm adjust window, PT1/8 port, and the female M6x1.0 rod-end thread suit your mounting interface. The -S code ensures switch readiness, but remember a plain cylinder drifts if air is lost or the valve is centred. The fixed bumper only decelerates near the end of travel; for secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 55–75 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M10×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-20S FAQ
This double-acting cylinder generates 402.1 N push and 345.6 N pull at 0.5 MPa, and 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum push force is 82 kgf at 1.0 MPa.
The M10x1.25 R screw mechanically shortens the extend end position anywhere between 55 and 75 mm without altering the 402.1 N force. The -S code denotes a built-in piston magnet for tracking position with AirTAC reed or electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.