Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-10S
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-10S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 90 to 100 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke100 mm
- Adjustable range90–100 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-10S
The AirTAC SDAJ100X100-10S is a double-acting compact cylinder featuring a 100 mm bore and an external adjustable extend stop. A built-in piston magnet (-S) enables position sensing with AirTAC reed or electronic switches. The short riveted body saves axial mounting depth where larger profile cylinders cannot fit. Force remains identical to a standard SDA of this bore, delivering 3927 N push at 0.5 MPa.
Turn the R (M27x2.0) adjuster screw to shorten the extend stroke on-site, dialling the rod end between 90 and 100 mm without changing shims or parts. The piston rod is 32 mm thick with a female M18x1.5 rod-end thread. A fixed NBR bumper decelerates the stroke end; it is not an adjustable air cushion. The 10 mm window allows fine commissioning tweaks for heavy-duty positioning.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-10S Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 100 mm |
| Adjustable range | 90 – 100 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-10S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-10S Is Used
Heavy Press Tuning
Dial in the exact 90-100 mm extend stop during press setup to seat heavy bearings without overtravel, leveraging the 3927 N push force safely.
Automated Welding Clamp
Adjust the R screw on-site to compensate for electrode wear, maintaining precise clamping depth on thick steel assemblies.
Vertical Lift Fixture
Lift payloads up to 200.2 kg with a 2:1 safety margin, using the 10 mm window to fine-tune the upper stop position for delicate placement.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-10S the Right Cylinder?
This 100 mm bore generates 3927 N push at 0.5 MPa, offering a safe working load around 2356 N (60 percent of capacity) and a vertical lift capacity near 200.2 kg with a 2:1 margin. Sizing down, the SDAJ80 provides 2513.3 N push at 0.5 MPa for lighter rigs. Choose this model when your fixture needs exact 90-100 mm extend tuning during machine changeover. Confirm your port is PT3/8 and the rod thread is female M18x1.5. The -S magnet supports solid-state sensing.
A plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the stroke end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Operating speed spans 30-500 mm/s across the 0.15-1.0 MPa pressure range.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 90–100 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-10S FAQ
This double-acting cylinder delivers 3927 N push and 3524.9 N pull at 0.5 MPa. At 0.7 MPa it provides 5497.8 N push and 4934.8 N pull. The theoretical maximum push force is 801 kgf at 1.0 MPa.
The R (M27x2.0) screw mechanically shortens the extend stop between 90 and 100 mm without altering force. The built-in -S magnet works with AirTAC reed or electronic switches for end-position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.