Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-100S
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-100S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 10 to 110 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke110 mm
- Adjustable range10–110 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-100S
The SDAJ100X110-100S is a 100mm bore double-acting compact cylinder featuring an external R (M27x2.0) adjuster screw that dials the extend stop anywhere between 10 and 110 mm. Because the screw sets the mechanical stop rather than altering the piston area, output force remains identical to a standard SDA of this bore, delivering 3927 N of push at 0.5 MPa. Its short riveted body drastically reduces axial mounting depth where a larger profile cylinder cannot fit.
This unit includes a built-in piston magnet for AirTAC reed or electronic switches and uses a 32 mm rod with an M18x1.5 female thread. End-of-travel energy is managed by a fixed NBR bumper that decelerates the load, meaning it is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-100S Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 110 mm |
| Adjustable range | 10 – 110 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-100S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-100S Is Used
Heavy Press Tuning
Dial the 10-110 mm extend stop on the fly to set exact contact depth for heavy pressing operations without swapping mechanical shims.
Multi-Product Changeover
Reposition the rod end precisely during production line changeovers, leveraging the 3927 N push force to seat large components securely.
Trial Lift Positioning
Safely test vertical lift heights up to 200.2 kg with a 2:1 margin, adjusting the stop screw to find the optimal raise distance before finalizing the cycle.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-100S the Right Cylinder?
When sizing this 100mm bore actuator, consider the SDAJ80 as the next step down, providing 2513.3 N of push at 0.5 MPa. The SDAJ100 sits at the top of the range, yielding a safe working load of roughly 2356 N (about 60% of its 3927 N capacity) and a vertical lift capability of approximately 200.2 kg with a 2:1 margin. Choose this specific model if your fixture requires heavy push force combined with frequent on-machine stroke tuning during changeovers.
Confirm the 110 mm maximum stroke, 100 mm adjustment window, and PT3/8 port match your manifold layout. The -S code denotes the integrated magnet for position sensing, while the female M18x1.5 rod end dictates your mounting interface. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 10–110 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-100S FAQ
At 0.5 MPa this 100mm bore cylinder provides 3927 N of push and 3524.9 N of pull. At 0.7 MPa, push increases to 5497.8 N and pull to 4934.8 N. The theoretical maximum push force is 801 kgf at 1.0 MPa.
Turning the M27x2.0 adjuster screw shortens the extend stroke by up to 100 mm, allowing usable extension from 10 to 110 mm. The -S code indicates a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches for precise end-position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.