Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-50SB
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-50SB is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 60 to 110 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke110 mm
- Adjustable range60–110 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-50SB
The AirTAC SDAJ100X110-50SB is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M27x2.0) screw, you can dial the forward stroke down from the 110 mm maximum to anywhere between 60 and 110 mm directly on the machine. Because the adjuster only sets the mechanical stop position rather than altering the piston area, output force remains identical to a standard SDA of this bore, delivering 3927 N of push at 0.5 MPa.
This model includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, and a male-thread piston rod (-B, M26x1.5) for secure tool mounting. The short riveted body drastically reduces axial mounting depth where a larger profile cylinder would never fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a locking mechanism.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-50SB Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 110 mm |
| Adjustable range | 60 – 110 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-50SB
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-50SB Is Used
Heavy Press Fitments
Dial the 60-110 mm extend stop to set precise insertion depths for heavy bearings, utilizing the 3927 N push force without swapping out physical spacers.
Multi-Product Forming Lines
Adjust the mechanical stop on-site during product changeovers to accommodate different material thicknesses, relying on the fixed NBR bumper to absorb end shocks.
Vertical Lift Stations
Lift loads up to 200.2 kg with a 2:1 safety margin, using the male M26x1.5 rod thread for robust tooling attachment in compact vertical elevators.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-50SB the Right Cylinder?
When sizing this 100 mm bore actuator, compare it both ways: stepping down to an SDAJ80 yields 2513.3 N of push at 0.5 MPa, whereas this 100 mm unit provides 3927 N. With a safe working load around 2356 N (approximately 60% of the 0.5 MPa figure) and a vertical lift capacity of roughly 200.2 kg using a 2:1 safety margin, it suits heavy pressing and lifting tasks. Operators who require frequent changeovers or trial positioning will benefit from the 50 mm on-site adjustment window.
Confirm your requirements for the 110 mm maximum stroke, 50 mm window, PT3/8 air port, male M26x1.5 rod end, and the integrated magnet. Note that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston drifts and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 60–110 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-50SB FAQ
At 0.5 MPa it provides 3927 N push and 3524.9 N pull. At 0.7 MPa it provides 5497.8 N push and 4934.8 N pull. The theoretical maximum push is 801 kgf at 1.0 MPa.
The R (M27x2.0) screw shortens the extend stroke by up to 50 mm, allowing a usable range of 60-110 mm; it sets the stop position and does not alter force. The -S code indicates a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X110-50SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.