Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-10B
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-10B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 120 to 130 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke130 mm
- Adjustable range120–130 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-10B
The AirTAC SDAJ100X130-10B is a double-acting, single-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M27x2.0) screw, you can dial the forward stroke down by up to 10 mm on-site, giving a usable extend range of 120 to 130 mm without swapping shims or parts. Because the adjuster only sets the mechanical stop position, output force remains identical to a standard SDA of this bore, delivering 3927 N of push at 0.5 MPa.
This 100 mm bore unit uses a male-threaded piston rod (M26x1.5) and a PT3/8 air port. Its short riveted body saves axial mounting depth where larger profile or round-body cylinders cannot fit. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, so for high-energy cycles you should slow the approach or add an external shock absorber.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-10B Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 130 mm |
| Adjustable range | 120 – 130 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-10B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-10B Is Used
Heavy Press Tooling Setup
Dial in the 120-130 mm extend stop during press tooling commissioning to achieve exact contact depth, leveraging the 3927 N push force for secure forming operations.
Large Fixture Changeover
Quickly readjust the mechanical stop when switching between heavy machining fixtures on automated lines, saving axial space with the compact riveted body.
Vertical Lift Positioning
Lift loads up to 200.2 kg with a 2:1 margin and fine-tune the lower endpoint, ensuring precise placement without needing custom length spacers.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-10B the Right Cylinder?
When sizing this model, compare its 3927 N push at 0.5 MPa against neighbouring bores. Stepping down to an SDAJ80 yields 2513.3 N, whereas this 100 mm option provides the extra thrust needed for heavier tooling. Given the 3927 N capacity, the safe working load is approximately 2356 N (about 60 percent of the 0.5 MPa figure), allowing a vertical lift of roughly 200.2 kg with a 2:1 safety margin.
Choose this configuration if your machine build requires precise on-site stroke tuning to hit a target position. Confirm your parameters: 100 mm bore, 130 mm maximum stroke, 10 mm adjust window, PT3/8 port, male M26x1.5 rod thread, and no piston magnet. Note that a plain cylinder drifts when air is lost or the valve is centred; the bumper only decelerates near the end and is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 120–130 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-10B FAQ
At 0.5 MPa it provides 3927 N push and 3524.9 N pull. At 0.7 MPa it provides 5497.8 N push and 4934.8 N pull. The theoretical maximum push is 801 kgf at 1.0 MPa.
The R (M27x2.0) screw mechanically shortens the extend stop by up to 10 mm, giving a 120-130 mm range; it does not alter force. This specific SKU lacks the -S option, so it has no piston magnet and cannot accept reed or electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.