Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30B
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 100 to 130 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke130 mm
- Adjustable range100–130 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30B
The SDAJ100X130-30B is a double-acting compact riveted-body cylinder featuring an external adjustable extend stop. Turning the R (M27x2.0) screw lets you dial the extend end-position anywhere between 100 and 130 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Because the adjuster only sets the mechanical stop and not the piston area, output force remains identical to a standard SDA of this size, delivering 3927 N of push at 0.5 MPa.
This 100 mm bore unit uses a PT3/8 port and a male-threaded piston rod (M26x1.5) to handle heavy loads. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30B Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 130 mm |
| Adjustable range | 100 – 130 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30B Is Used
Heavy Press Tuning
Dial in the 100-130 mm extend stop on-site for high-force pressing tasks, ensuring precise contact without swapping mechanical spacers.
Vertical Lifting Stops
Lift loads up to 200.2 kg safely; adjust the R screw to set exact upper travel limits during initial rigging or payload changes.
Compact Forming Lines
Fit the short riveted body into tight machine frames to deliver 3927 N of push at 0.5 MPa where standard profile cylinders take up too much depth.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30B the Right Cylinder?
When sizing this model, consider the force boundaries: the 100 mm bore yields 3927 N push at 0.5 MPa, while stepping down to an SDAJ80 provides 2513.3 N. This SDAJ100X130-30B configuration includes a 30 mm adjustment window (yielding a 100-130 mm extend range), a male M26x1.5 rod thread, and no piston magnet, meaning magnetic switches cannot be used unless upgraded to an -S variant. It is ideal for setups requiring on-site stroke tuning to dial in exact pressing or lifting positions.
A safe working load is approximately 2356 N (about 60 percent of the 0.5 MPa push figure), translating to a vertical lift capacity of roughly 200.2 kg with a 2:1 safety margin. Note that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 100–130 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30B FAQ
At 0.5 MPa it provides 3927 N push and 3524.9 N pull. At 0.7 MPa it provides 5497.8 N push and 4934.8 N pull. The theoretical maximum push is 801 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
The M27x2.0 adjuster screw mechanically shortens the extend stroke from the nominal 130 mm down to 100 mm. It acts only as an end-of-stroke stop and does not lock the piston mid-travel. This SKU lacks a piston magnet, so position sensing is not possible without the -S option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.