Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30S
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 100 to 130 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke130 mm
- Adjustable range100–130 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30S
The AirTAC SDAJ100X130-30S is a double-acting compact cylinder featuring an external adjustable extend stop. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches. The R (M27x2.0) adjuster screw lets you dial the extend position down from 130 mm to 100 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Force remains identical to a standard SDA of this bore, delivering 3927 N push at 0.5 MPa, because the adjuster sets the mechanical stop rather than altering the piston area. The short riveted body saves axial mounting depth where larger profile cylinders cannot fit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30S Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 130 mm |
| Adjustable range | 100 – 130 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30S Is Used
Heavy Press Tuning
Dial the extend stop from 130 mm down to 100 mm to set precise forming depth on heavy press tools without machining new spacers.
Vertical Lifting Arms
Lift approximately 200.2 kg with a 2:1 safety margin, using the adjustable stop to set exact upper travel limits for material handling arms.
Large Fixture Changeover
Adapt large assembly fixtures quickly by turning the R screw to shorten the extend position, accommodating varied part heights on the same line.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30S the Right Cylinder?
When sizing this model, evaluate both directions: stepping down to an SDAJ80 yields 2513.3 N push at 0.5 MPa, while this 100 mm bore provides 3927 N. This makes the 100 mm ideal when the smaller variant lacks thrust. A safe working load is roughly 2356 N (about 60 percent of the 0.5 MPa figure), allowing a vertical lift of approximately 200.2 kg with a 2:1 safety margin.
This model suits setups requiring on-site stroke tuning between 100 and 130 mm. Confirm the PT3/8 port, the 32 mm rod, and the female M18x1.5 thread. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 100–130 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30S FAQ
It delivers 3927 N push and 3524.9 N pull at 0.5 MPa. At 0.7 MPa, push is 5497.8 N and pull is 4934.8 N. The theoretical maximum push is 801 kgf at 1.0 MPa.
The M27x2.0 adjuster screw shortens the extend stroke by up to 30 mm, yielding a usable range of 100 to 130 mm. The included -S magnet works with AirTAC reed or electronic switches for end-of-stroke sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X130-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.