Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30SB
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30SB is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke30 mm
- Adjustable range0–30 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30SB
The AirTAC SDAJ100X30-30SB is a double-acting compact cylinder featuring an external adjustable extend stop. Turning the R (M27x2.0) screw lets you dial the extend position from 0 to 30 mm directly on the machine, removing the need for shims or part swaps during changeovers. The adjuster strictly sets the mechanical stop; it does not alter the piston area, meaning force equals a standard SDA of this 100 mm bore at 3927 N push at 0.5 MPa.
The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. This specific build includes a built-in piston magnet for AirTAC reed or electronic switches and a male M26x1.5 piston rod thread. End shock is handled by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30SB Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30SB
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30SB Is Used
Heavy Press Tooling
Dial the 0-30 mm extend stop to precisely set a 200.2 kg vertical clamping depth on heavy press tooling without swapping mechanical spacers.
Product Changeover
Quickly reposition the male M26x1.5 rod end during product changeover on a line, using the R screw to accommodate varying workpiece heights.
Short-Depth Assembly
Leverage the compact riveted body to deliver 3927 N of thrust in a short-depth assembly cell where standard larger cylinders cannot fit axially.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30SB the Right Cylinder?
When sizing this model, compare its 3927 N push at 0.5 MPa against adjacent bores. Stepping down to the SDAJ80 yields 2513.3 N at 0.5 MPa, whereas this 100 mm bore provides a safe working load of roughly 2356 N (about 60 percent of the 0.5 MPa figure) and a vertical lift capacity of approximately 200.2 kg with a 2:1 margin. Choose the 100 mm bore when the smaller variant lacks thrust for heavy tooling.
This configuration is ideal for setups requiring on-site stroke tuning to perfect the end position. Confirm the bore (100 mm), full stroke (30 mm), 30 mm adjustment window, PT3/8 air port, male M26x1.5 rod thread, and the -S magnet for switch integration. Remember that a plain cylinder does not hold its load on air loss or valve centring; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–30 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30SB FAQ
This 100 mm bore double-acting cylinder delivers 3927 N push and 3524.9 N pull at 0.5 MPa, 5497.8 N push and 4934.8 N pull at 0.7 MPa, with a theoretical maximum of 801 kgf at 1.0 MPa. The external adjuster sets the stop position and does not change these force values.
The M27x2.0 adjuster screw shortens the extend stroke by up to 30 mm, giving a usable extend range of 0 to 30 mm while retract remains full. The included -S magnet works with AirTAC reed or electronic switches for end-of-stroke sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.