Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-20SB
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-20SB is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke45 mm
- Adjustable range25–45 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-20SB
The AirTAC SDAJ100X45-20SB is a compact double-acting single-rod cylinder built for tight axial spaces, featuring a built-in piston magnet and a male M26x1.5 piston rod thread. A fixed NBR bumper decelerates the stroke end, while the external R (M27x2.0) adjuster screw lets you dial the extend stop down by 20 mm on-site, yielding a usable 25 to 45 mm forward travel. Retract remains full length.
Because the adjuster sets the mechanical stop rather than altering the piston area, output force equals a standard SDA of this bore, delivering 3927 N push at 0.5 MPa. The short riveted body saves mounting depth where larger profile or round-body units will not fit, and it accepts standard AirTAC compact-cylinder accessories.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-20SB Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 45 mm |
| Adjustable range | 25 – 45 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-20SB
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-20SB Is Used
Heavy Press Fit Tuning
Dial the 25-45 mm extend stop during commissioning to find the exact press depth for heavy bearings without swapping mechanical shims.
Product Changeover Stops
Adjust the forward position on the fly for different product heights on a high-force assembly line, leveraging the 3927 N push at 0.5 MPa.
Vertical Lift Positioning
Set precise upper travel limits for a 200.2 kg vertical lift rig, relying on the fixed NBR bumper to absorb the end-of-stroke shock.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-20SB the Right Cylinder?
When sizing this unit, consider the SDAJ80 which offers 2513.3 N push at 0.5 MPa, versus this 100 mm bore at 3927 N. This larger bore yields a safe working load of roughly 2356 N (about 60% of the 0.5 MPa figure) and a vertical lift capacity near 200.2 kg with a 2:1 margin. Choose the 100 mm if your setup-heavy line needs that extra push authority within a compact footprint.
This configuration includes the -S magnet for AirTAC reed or electronic switches and the -B male-thread M26x1.5 rod end. Operating speed spans 30-500 mm/s. Remember that a plain cylinder does not hold its load on air loss or valve centering; the bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 25–45 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-20SB FAQ
This 100 mm bore double-acting cylinder provides 3927 N push and 3524.9 N pull at 0.5 MPa, 5497.8 N push and 4934.8 N pull at 0.7 MPa, with a theoretical maximum push of 801 kgf at 1.0 MPa.
The R (M27x2.0) screw shortens the extend stop from the 45 mm maximum down to 25 mm without changing the force. The included -S magnet works with AirTAC reed or electronic solid-state switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-20SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.