Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke5 mm
- Adjustable range0–5 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10
The AirTAC SDAJ100X5-10 is a double-acting compact cylinder featuring an external adjustable extend stop. A built-in M27x2.0 screw lets you dial the outward position down to 0 mm right at the machine, eliminating the need for shims or part swaps during commissioning. Because the adjuster only sets the mechanical stop rather than altering the piston area, output force remains identical to a standard SDA of this bore, yielding 3927 N of push at 0.5 MPa.
This riveted-body design saves substantial axial mounting depth where a larger profile cylinder would never fit. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10 Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 5 mm |
| Adjustable range | 0 – 5 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×5 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10 Is Used
Heavy-Duty Short-Stroke Clamping
Apply 3927 N of precise clamping force on thick steel plates, using the M27x2.0 screw to dial the exact 0-5 mm contact point without swapping fixtures.
Vertical Lift Positioning
Hoist a 200.2 kg payload with a 2:1 safety margin, tweaking the extend stop on the rig to ensure the load seats perfectly into its cradle every cycle.
Riveted-Body Press Assembly
Fit substantial pressing power into a shallow machine frame thanks to the compact riveted body, using the fixed NBR bumper to absorb the end shock.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10 the Right Cylinder?
When sizing this unit, look both directions for your thrust needs. Stepping down to the SDAJ80 provides 2513.3 N of push at 0.5 MPa, whereas this 100 mm bore delivers 3927 N, yielding a safe working load of roughly 2356 N or a 200.2 kg vertical lift with a 2:1 margin. Choose the 100 mm option when you need that extra clamping or lifting authority in a tight footprint. Confirm your parameters: 100 mm bore, 5 mm maximum stroke, 10 mm adjustment window, PT3/8 port, female M18x1.5 rod thread, and no magnet.
This actuator is ideal for operators who require precise on-site stroke tuning to perfect a pressing or holding distance. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–5 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10 FAQ
This 100 mm bore double-acting cylinder provides 3927 N push and 3524.9 N pull at 0.5 MPa, 5497.8 N push and 4934.8 N pull at 0.7 MPa, and a theoretical maximum of 801 kgf at 1.0 MPa.
The external M27x2.0 screw shortens the extend stop by up to 10 mm, allowing you to set the outward stroke anywhere between 0 and 5 mm on-site. The retract stroke remains full, and the screw acts purely as a mechanical stop, not a mid-stroke lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.