Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10SB
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10SB is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke5 mm
- Adjustable range0–5 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10SB
The AirTAC SDAJ100X5-10SB is a 100mm bore double-acting compact cylinder featuring an on-site adjustable extend stop. Turning the external M27x2.0 adjuster screw lets you dial the extend position down to 0 mm from the 5 mm maximum, removing the need for shims during machine commissioning. The short riveted body saves valuable axial mounting depth where a larger profile cylinder cannot fit.
Because the adjuster only sets the mechanical stop, force remains identical to a standard SDA of this bore, delivering about 3927 N push at 0.5 MPa. This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M26x1.5 threaded rod end. End shock is absorbed by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10SB Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 5 mm |
| Adjustable range | 0 – 5 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10SB
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×5 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10SB Is Used
Press Fit Dial-In
Use the M27x2.0 screw to micro-adjust the 0-5mm extend stop during press fit commissioning, ensuring the 3927N push force seats parts without bottoming out.
Heavy Vertical Lift
Lift up to 200.2kg safely with a 2:1 margin, relying on the male M26x1.5 rod for robust tooling attachment in compact vertical elevation stations.
Changeover Positioning
Quickly reposition the extend stop for new product families on high-mix lines without disassembling the cylinder or swapping mechanical spacers.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10SB the Right Cylinder?
When sizing this actuator, consider the SDAJ80 as the next bore down, providing 2513.3 N push at 0.5 MPa, while this 100mm bore yields 3927 N. A computed safe working load is roughly 2356 N, equating to a vertical lift capacity of about 200.2 kg with a 2:1 safety margin. Choose this model if your assembly requires precise on-site stroke tuning to hit a target position.
Confirm the 100mm bore, 5mm stroke, 10mm adjustment window, and PT3/8 port match your pneumatic layout. This variant includes the -S magnet for position sensing and the -B male M26x1.5 rod thread. Remember that a plain cylinder does not hold a load on air loss; the fixed bumper only decelerates near the end, so add an external rod lock or pilot-operated check valve for load holding.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–5 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10SB FAQ
This 100mm bore cylinder has a PT3/8 port. It provides 3927 N push and 3524.9 N pull at 0.5 MPa, 5497.8 N push and 4934.8 N pull at 0.7 MPa, and a theoretical maximum push of 801 kgf at 1.0 MPa.
The external screw shortens the 5mm extend stroke down to 0mm on-site. The included -S magnet allows you to mount AirTAC reed or electronic switches directly into the body sensor grooves for end-position confirmation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.