Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30B
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke60 mm
- Adjustable range30–60 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30B
The AirTAC SDAJ100X60-30B is a double-acting compact cylinder featuring a 100mm bore and a male-thread piston rod (M26x1.5). An external M27x2.0 adjuster screw lets you dial the extend stop directly on the machine, shortening the stroke by up to 30mm to yield a precise 30 to 60mm usable forward travel without swapping shims or parts. Because the adjuster sets the mechanical stop rather than altering the piston area, output force remains identical to a standard SDA of this size, delivering 3927N of push at 0.5MPa.
The short riveted body saves valuable axial mounting depth in tight fixtures where larger profile or round-body units cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating pressure spans 0.15 to 1.0MPa, and the unit travels at 30-500mm/s.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30B Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30B Is Used
Heavy Press Fitment
Dial in the 30-60mm extend stop on heavy press operations to prevent over-travel, utilizing the full 3927N push at 0.5MPa without changing mounting hardware.
Vertical Lift Fixtures
Lift loads up to 200.2kg with a 2:1 safety margin, using the male M26x1.5 rod to secure heavy tooling while fine-tuning the exact raise height on-site.
Short-Depth Clamping
Install the compact riveted body where axial space is restricted, relying on the fixed NBR bumper to absorb the end shock of high-force clamping cycles.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30B the Right Cylinder?
When sizing this 100mm bore actuator, evaluate your neighbors: stepping down to the SDAJ80 yields 2513.3N push at 0.5MPa, whereas this 100mm unit provides 3927N. This makes the SDAJ100 ideal if the 80mm falls short, offering a safe working load around 2356N (approximately 60 percent of the 0.5MPa push figure) and a vertical lift capacity of roughly 200.2kg with a 2:1 safety margin. Choose this specific SKU when your assembly requires on-site stroke tuning within the 30-60mm window, a PT3/8 port, and a male M26x1.5 rod end.
Note that this configuration lacks the -S magnet, meaning it cannot accept reed or electronic switches for position sensing. Furthermore, a plain compact cylinder does not hold its load if air pressure drops or the valve centers; the piston will drift. For suspended or vertical loads that must remain fixed without live pressure, incorporate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 30–60 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30B FAQ
This 100mm bore cylinder features a PT3/8 port and delivers 3927N push and 3524.9N pull at 0.5MPa. At 0.7MPa, push increases to 5497.8N and pull to 4934.8N. The theoretical maximum push force is 801kgf at 1.0MPa.
Turning the R (M27x2.0) screw mechanically shortens the forward end position by up to 30mm, providing a usable extend range of 30 to 60mm. This adjustment sets the physical stop and does not alter the cylinder's force output or lock the piston mid-stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.