Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30SB
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30SB is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke60 mm
- Adjustable range30–60 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30SB
The SDAJ100X60-30SB is a double-acting compact cylinder featuring a 100mm bore and an external extend stop. A built-in magnet and male M26x1.5 piston rod come standard on this variant. The short riveted body saves axial mounting depth where round-body or profile alternatives will not fit, delivering substantial force in a tight footprint.
Turning the R (M27x2.0) adjuster screw dials the extend end-position anywhere between 30 and 60 mm without swapping shims or parts. Because the adjuster sets the mechanical stop rather than the piston area, output remains identical to a standard SDA of this size, yielding about 3927 N push at 0.5 MPa. End-of-travel energy is managed solely by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30SB Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30SB
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30SB Is Used
Press Tooling Setup
Dial the extend stop between 30 and 60 mm to trial press positions on heavy fixtures without machining new spacers.
Product Changeover Lines
Rapidly reconfigure the 3927 N extend endpoint for different product heights during automated line format changes.
Heavy Vertical Lifting
Lift loads up to 200.2 kg with a 2:1 safety margin, relying on the male M26x1.5 rod for robust tooling attachment.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30SB the Right Cylinder?
This 100mm bore generates 3927 N push at 0.5 MPa. If your setup is overpowered, sizing down to the SDAJ80 drops the output to 2513.3 N push at 0.5 MPa; sizing up is not possible as this is the largest standard bore. Engineers needing on-site stroke tuning for changeovers will benefit from the 30 mm adjustment window, while those requiring vertical lift should note a safe working load around 2356 N (about 60% of the 0.5 MPa figure) or a 200.2 kg lift with a 2:1 margin.
Confirm the 60mm maximum stroke, 30mm window, PT3/8 port, and male M26x1.5 rod thread suit your tooling. The included -S magnet supports AirTAC reed or electronic switches for position sensing. Remember that a plain cylinder does not hold position on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 30–60 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30SB FAQ
At 0.5 MPa it provides 3927 N push and 3524.9 N pull. At 0.7 MPa it provides 5497.8 N push and 4934.8 N pull. The theoretical maximum push is 801 kgf at 1.0 MPa.
The R (M27x2.0) screw shortens the extend stop by up to 30 mm, yielding a usable 30 to 60 mm range. The -S code indicates a built-in piston magnet designed to trigger AirTAC reed or electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.