Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-10SB
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-10SB is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 55 to 65 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke65 mm
- Adjustable range55–65 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-10SB
The AirTAC SDAJ100X65-10SB is a compact double-acting single-rod cylinder built for tight axial footprints where space is at a premium. Its short riveted body saves mounting depth compared to standard profile bodies, while delivering a robust 3927 N push at 0.5 MPa. The external R (M27x2.0) adjuster screw lets you dial the extend stop directly on the machine between 55 and 65 mm without changing parts.
This unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and features a male M26x1.5 piston rod thread (-B). The fixed NBR bumper decelerates the stroke end but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-10SB Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 65 mm |
| Adjustable range | 55 – 65 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-10SB
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-10SB Is Used
Heavy Press Fitments
Dial in the exact 55 to 65 mm extension for pressing heavy bearings, using the 3927 N push force to seat components without over-traveling.
Large Crate Flipping
Adjust the extend stop on the fly to accommodate varying pallet widths, relying on the male M26x1.5 rod to securely drive the flipping mechanism.
Woodworking Clamp Arms
Fine-tune the clamping reach during product changeover, letting the fixed NBR bumper absorb the shock of rapid 30 to 500 mm/s movements.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-10SB the Right Cylinder?
When sizing this 100mm bore actuator, consider the SDAJ80 which yields 2513.3 N push at 0.5 MPa for lighter loads, or step up to this model for heavy-duty positioning. The 3927 N output provides a safe working load around 2356 N (roughly 60 percent of capacity) or a vertical lift of about 200.2 kg with a 2:1 margin. Choose this specific configuration if your fixture requires a male M26x1.5 rod end, magnetic sensing, and on-site stroke tuning.
Remember that a plain SDAJ does not hold position when air is lost or the valve is centered; the piston drifts and the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your required 55 to 65 mm extend window, PT3/8 port, and the 10mm adjustment range fit your packaging layout.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 55–65 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-10SB FAQ
At 0.5 MPa this 100mm bore cylinder provides 3927 N push and 3524.9 N pull. At 0.7 MPa it provides 5497.8 N push and 4934.8 N pull. The theoretical maximum push is 801 kgf at 1.0 MPa.
The R (M27x2.0) screw shortens the extend stop by up to 10 mm, giving a usable 55 to 65 mm range without altering force. The built-in magnet works with AirTAC reed or electronic switches mounted in the body grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.