Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50SB
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50SB is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 20 to 70 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke70 mm
- Adjustable range20–70 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50SB
The AirTAC SDAJ100X70-50SB is a compact double-acting single-rod cylinder featuring an external adjustable extend stop. Turning the R (M27x2.0) screw lets you dial the outward stroke on-site between 20 and 70 mm without swapping parts. Because the mechanism sets the mechanical stop rather than altering the piston area, output force remains identical to a standard SDA of this bore, providing 3927 N push at 0.5 MPa.
This model includes a built-in piston magnet for AirTAC reed or electronic switches and a male-thread piston rod (M26x1.5). The short riveted body saves axial mounting depth where larger profile cylinders cannot fit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50SB Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 70 mm |
| Adjustable range | 20 – 70 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50SB
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50SB Is Used
Heavy Press Tuning
Dial in the exact 20-70 mm extend stop on a 200.2 kg vertical press without shims, relying on 3927 N of push force.
Multi-Product Forming
Adjust the outward stroke on-site for different part heights, letting the fixed NBR bumper absorb the 5497.8 N impact at 0.7 MPa.
High-Load Lifting Stations
Lift heavy assemblies using the male M26x1.5 rod, tweaking the stop position to clear obstacles within tight riveted-body clearances.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50SB the Right Cylinder?
When sizing this 100 mm bore actuator, evaluate your force requirements bidirectionally. Dropping to an SDAJ80 yields 2513.3 N push at 0.5 MPa, whereas this 100 mm bore provides 3927 N. A safe working load is approximately 2356 N, representing about 60 percent of the 0.5 MPa push figure, which translates to a vertical lift capacity of roughly 200.2 kg with a 2:1 safety margin.
Choose this specific configuration if your machine requires frequent extend-position tuning during changeovers. Verify your setup needs the 20-70 mm adjust window, PT3/8 port, the -S magnet for sensing, and the -B male M26x1.5 rod thread. Note that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 20–70 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50SB FAQ
At 0.5 MPa it provides 3927 N push and 3524.9 N pull. At 0.7 MPa it provides 5497.8 N push and 4934.8 N pull. The theoretical maximum push is 801 kgf at 1.0 MPa.
The R (M27x2.0) screw shortens the extend stop by up to 50 mm, giving a usable 20-70 mm range. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.