Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10SB
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10SB is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke75 mm
- Adjustable range65–75 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10SB
The AirTAC SDAJ100X75-10SB is a compact double-acting single-rod cylinder featuring an on-site adjustable extend stop. A built-in M27x2.0 adjuster screw lets you dial the forward stroke anywhere between 65 and 75 mm without swapping shims or parts, streamlining final positioning on heavy machinery. Because the adjuster only sets the mechanical stop and not the piston area, output force equals a standard SDA of this bore, delivering about 3927 N push at 0.5 MPa.
This unit carries the S and B option codes, meaning it includes a piston magnet for AirTAC reed or electronic switches and a male M26x1.5 piston rod thread. The short riveted body drastically reduces axial mounting depth compared to conventional round-body alternatives. End shock is managed solely by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10SB Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10SB
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10SB Is Used
Heavy Press Tonnage Setup
Dial in the exact 65-75 mm extend stop during press commissioning to set forming depth, utilizing the 3927 N push force without changing mounting hardware.
Vertical Lift Fixture
Raise components weighing up to 200.2 kg with a 2:1 safety margin, relying on the male M26x1.5 rod thread to secure heavy tooling securely.
Short-Depth Assembly Station
Install the compact riveted body where axial space is restricted, using the integrated magnet to trigger reed or electronic switches for part confirmation.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10SB the Right Cylinder?
When sizing this 100 mm bore actuator, consider the neighbouring bores to match your exact payload. Stepping down, the SDAJ80 provides 2513.3 N push at 0.5 MPa, serving as a lighter alternative if your mass is lower. Stepping up is not applicable here as 100 mm is the largest available SDA family bore. Based on the 3927 N push figure at 0.5 MPa, a safe working load is approximately 2356 N (about 60 percent of capacity), translating to a vertical lift capability of roughly 200.2 kg with a 2:1 safety margin.
Choose this specific configuration if your fixture requires precise on-machine extend tuning between 65 and 75 mm. Confirm your setup requires the male M26x1.5 rod end, the PT3/8 air port, and the integrated magnet for switch sensing. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of stroke. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 65–75 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10SB FAQ
This 100 mm bore double-acting cylinder provides 3927 N push and 3524.9 N pull at 0.5 MPa. At 0.7 MPa, push increases to 5497.8 N and pull to 4934.8 N. The theoretical maximum push force is 801 kgf at 1.0 MPa.
The M27x2.0 adjuster screw mechanically shortens the extend end-position by up to 10 mm, giving a usable range of 65 to 75 mm. It does not alter force or lock mid-stroke. The included S magnet works with AirTAC reed or electronic switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.