Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-10SB
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-10SB is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke80 mm
- Adjustable range70–80 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-10SB
The SDAJ100X80-10SB is a double-acting compact cylinder with an external adjustable extend stop. Turning the R (M27x2.0) screw lets you dial the extend position anywhere between 70 and 80 mm directly on the machine. Output matches a standard SDA of this bore, delivering 3927 N push at 0.5 MPa, because the adjuster sets the mechanical stop rather than altering the piston area.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M26x1.5 rod thread. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-10SB Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-10SB
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-10SB Is Used
Heavy Press Fitment
Dialing the M27x2.0 screw provides exact 70-80 mm extend positioning for heavy press operations demanding 3927 N push without part changes.
Assembly Line Changeover
The short riveted body saves axial depth on cramped assembly lines while the external stop allows rapid extend reconfiguration during product changeovers.
Vertical Lifting Jig
Provides a safe vertical lift of roughly 200.2 kg with a 2:1 margin, utilizing the male M26x1.5 rod end for secure heavy fixture mounting.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-10SB the Right Cylinder?
When sizing this 100 mm bore actuator, consider the SDAJ80 which yields 2513.3 N push at 0.5 MPa for lighter frames, versus this unit at 3927 N. The on-site stroke tuning is ideal for heavy setup lines needing precise 70-80 mm extend positioning. A safe working load is roughly 2356 N, or about 60 percent of the 0.5 MPa figure, allowing a vertical lift of approximately 200.2 kg with a 2:1 margin.
Confirm the 100 mm bore, 80 mm stroke, 10 mm window, and PT3/8 port. This SKU includes the S magnet and B male rod thread. Remember a plain cylinder drifts on air loss; the fixed bumper only decelerates near the end and is never a lock. Use an external rod lock or pilot-operated check valve for load holding.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 70–80 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-10SB FAQ
At 0.5 MPa the push is 3927 N and pull is 3524.9 N. At 0.7 MPa the push is 5497.8 N. The theoretical maximum push is 801 kgf at 1.0 MPa.
The S code provides a built-in piston magnet for AirTAC reed or electronic switches. The R (M27x2.0) screw shortens the extend stop by up to 10 mm, yielding a 70-80 mm usable range without changing force.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.