Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-30B
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-30B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 50 mm on the machine — no shims, no part change.
- BoreØ80 mm
- Max stroke50 mm
- Adjustable range20–50 mm
- Adjuster threadM20×1.5
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-30B
The AirTAC SDAJ80X50-30B is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop between 20 and 50 mm directly on your equipment. It delivers 2513.3 N of push force at 0.5 MPa, matching a standard SDA of this bore because the adjuster sets the mechanical stop, not the piston area. The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit.
This specific SKU includes a male M22x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without the -S option. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-30B Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 50 mm |
| Adjustable range | 20 – 50 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-30B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-30B Is Used
Heavy Press Tonnage Setup
Dialing the extend stop from 20 to 50 mm lets operators fine-tune heavy press engagement on the fly without swapping parts.
128 kg Vertical Lift Jig
Lifting a 128.1 kg payload with a 2:1 safety margin is safe, while the male M22x1.5 rod secures heavy tooling plates.
Product Divertor Changeover
Adjusting the mechanical stop in seconds accommodates varying package sizes on a packaging line during rapid format transitions.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-30B the Right Cylinder?
When sizing this 80 mm bore, stepping down to the SDAJ63 yields 1558.6 N of push at 0.5 MPa, whereas stepping up to the SDAJ100 provides 3927 N. This model fits applications needing roughly 2513.3 N, offering a safe working load around 1508 N (about 60% of the 0.5 MPa figure) or a vertical lift capacity near 128.1 kg with a 2:1 margin.
Operators requiring frequent changeover or trial positioning benefit from the 30 mm on-site adjustment window. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your bore, 50 mm stroke, 30 mm window, PT3/8 port, male M22x1.5 rod, and lack of magnet for this configuration.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 20–50 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M20×1.5 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-30B FAQ
This 80 mm bore cylinder uses a PT3/8 port and generates 2513.3 N push / 2267.8 N pull at 0.5 MPa, 3518.6 N push / 3175 N pull at 0.7 MPa, with a theoretical maximum of 513 kgf at 1.0 MPa.
The M20x1.5 screw shortens the extend end-position from the 50 mm maximum down to 20 mm without shims. It acts only as a mechanical stop, not a mid-stroke lock, and the cylinder cannot hold a load on air loss without an external rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-30B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.