Airtac SE100 Standard Air Cylinder SE100X1200S
The AirTAC Airtac SE100 Standard Air Cylinder SE100X1200S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 1200mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke1200 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE100 Standard Air Cylinder SE100X1200S
The AirTAC SE100X1200S is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a 100 mm bore and a 1200 mm stroke, generating a substantial 3927 N push force at 0.5 MPa. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush to machine frames.
This unit includes a built-in magnet (-S) for position detection, designed to interface directly with AirTAC CMSE reed and DMSE electronic sensors along the integrated grooves. Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at high speeds.
Airtac SE100 Standard Air Cylinder SE100X1200S Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X1200S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 1200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X1200S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×1200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X1200S Is Used
Automotive Body Panel Lift
Raises and lowers heavy stamped steel doors on a welding line, utilizing the 3927 N push force and 1200 mm stroke to clear the transfer conveyor.
Palletizer Push-off Arm
Actuates the sweep arm on a layer palletizer, relying on the 1200 mm extension to push completed product layers onto a waiting pallet.
CNC Machining Center Loader
Transfers heavy cast iron engine blocks into a milling station, using the -S magnet and DMSE sensors to confirm part staging.
Is the Airtac SE100 Standard Air Cylinder SE100X1200S the Right Cylinder?
Choosing this 100 mm bore makes sense when you need 3927 N of push at 0.5 MPa. If your application requires less force, stepping down to the 80 mm bore yields 2513 N push, while stepping up to the 125 mm bore provides 6136 N push. Because this model carries a 1200 mm stroke, the 25 mm rod and internal bearing face significant bending moments under side loads; always support the load with an external guide to prevent premature seal wear.
As a true ISO 15552 profile cylinder, it provides drop-in dimensional interchangeability for retrofits. The PT1/2 port and M20x1.5 rod thread are standard for this bore size. Note that the adjustable air cushion only decelerates the piston near stroke end and does not lock the rod; if the application must hold a load vertically without live air pressure, specify a BSE rod lock variant or use an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X1200S FAQ
At 0.5 MPa, this 100 mm bore cylinder outputs 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE100X1200S is dimensionally interchangeable with other ISO 15552 profile cylinders. You can swap it directly using existing mounting hardware and accessories, provided the 1200 mm stroke and PT1/2 port match your current footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X1200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.