Airtac SE100 Standard Air Cylinder SE100X250SG
The AirTAC Airtac SE100 Standard Air Cylinder SE100X250SG is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 250mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke250 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X250SG
The AirTAC SE100X250SG is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It yields a robust 3927 N push force at 0.5 MPa and features a 250 mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant exterior that simplifies mounting and sensor placement.
This model includes a built-in magnet (-S) for seamless positioning feedback via AirTAC CMSE reed or DMSE electronic sensors. The field-adjustable air cushioning at both ends lets you tune end-of-stroke deceleration to absorb high kinetic energy, preventing hard impacts at rapid cycle speeds.
Airtac SE100 Standard Air Cylinder SE100X250SG Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X250SG |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X250SG
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X250SG Is Used
Palletizer Case Pusher
Leveraging 3927 N of thrust at 0.5 MPa, this cylinder drives heavy corrugated cardboard cases onto palletizing lanes during high-speed end-of-line packaging operations.
Injection Mold Ejection
The 250 mm stroke and 801 kgf maximum force extract dense plastic automotive interior panels from large injection molding tools, ensuring reliable heavy-duty ejection.
CNC Lathe Bar Feeder
Equipped with DMSE electronic sensors for precise positioning, the 100 mm bore pushes heavy metal bar stock through the spindle of a CNC lathe, absorbing high kinetic loads.
Is the Airtac SE100 Standard Air Cylinder SE100X250SG the Right Cylinder?
Generating 3927 N of thrust at 0.5 MPa, this 100 mm bore is optimal for high-load actuation. If your application requires less force, the 80 mm bore provides 2513 N; conversely, scaling up to the 125 mm bore yields 6136 N. Because the 250 mm stroke generates significant bending moments over its length, utilizing an external guide rail is strongly recommended to prevent rod-bearing wear under lateral loads.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other standard profile cylinders. This specific configuration uses a G1/2 BSPP port thread, a 25 mm rod with an M20x1.5 thread, and includes the -S magnet for CMSE/DMSE switches. Note that the adjustable air cushion only decelerates the piston near stroke end and does not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X250SG FAQ
This cylinder provides 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum push force of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE100X250SG is dimensionally interchangeable per ISO 15552 standards. It shares the exact same mounting footprint and hardware interface as other standard profile cylinders, allowing for a seamless drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X250SG
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.