Airtac SE32 Standard Cylinder SE32X320
The AirTAC Airtac SE32 Standard Cylinder SE32X320 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 320mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke320 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X320
The AirTAC SE32X320 is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard. Delivering 402 N of push force at 0.5 MPa, it features a 32 mm bore and a 320 mm stroke. The square extruded aluminum barrel eliminates external tie rods, yielding a compact body that mounts flush against machine frames while resisting corrosion.
This SKU ships without a built-in magnet, meaning it is not wired for CMSE or DMSE position sensing out of the box. Both end caps incorporate field-adjustable pneumatic cushioning, allowing you to tune the needle valve to soften end-of-stroke impacts at operating speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X320 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X320 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 320 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X320
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×320 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X320 Is Used
PCB Depaneling Router
Provides the 402 N push force needed to drive a router spindle through separator tabs on a 320 mm travel axis.
Small Part Ejection
Ejects molded plastic parts from a vertical press cavity using the 345 N retract force across a 320 mm drop distance.
Lab Sample Dispensing
Positions a pipetting head over a multi-well tray, benefiting from the flush tie-rod-free barrel for easy washdown.
Is the Airtac SE32 Standard Cylinder SE32X320 the Right Cylinder?
Stepping down to a smaller bore is not an option from the 32 mm base size, but stepping up to the 40 mm bore yields a higher 628 N push at 0.5 MPa if your load requires more force. As a dimensionally interchangeable ISO 15552 component, this cylinder serves as a drop-in replacement for other ISO 15552 profile cylinders, matching the PT1/8 port and standard mounting hardware. Because the 320 mm stroke is substantial for a 12 mm rod, unsupported side loads can cause rod-bearing bending; integrate an external guide to prevent binding. Note that the air cushion only decelerates the piston near stroke end and does not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X320 FAQ
The SE32X320 generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa.
No, the double-acting single rod cannot hold position when air is exhausted, and the adjustable end cushions only decelerate motion near stroke end. For position holding, consider a BSE rod lock variant or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X320
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.