Airtac SE32 Standard Cylinder SE32X980S
The AirTAC Airtac SE32 Standard Cylinder SE32X980S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 980mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke980 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X980S
The AirTAC SE32X980S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics, delivering 402 N of push force at 0.5 MPa. Because it uses a square extruded aluminum barrel without external tie rods, it mounts flush against machine frames and resists corrosion in tight machinery spaces.
This specific unit includes a built-in magnet (-S) for non-contact position sensing using AirTAC CMSE reed or DMSE electronic switches. The 980 mm stroke is a non-standard, made-to-order length that maximizes travel within the 32 mm bore class, while field-adjustable air cushions at both ends absorb kinetic energy to protect your tooling.
Airtac SE32 Standard Cylinder SE32X980S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X980S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 980 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X980S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×980 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X980S Is Used
Diversion Gate Actuation
Drives a lightweight sorting flap on a packaging conveyor, using the 980 mm stroke to reach across the belt and the -S magnet to confirm gate position.
Sample Tray Extraction
Extracts long-travel sample trays from laboratory testing ovens, where the 402 N push force is sufficient to overcome tray friction and the compact profile saves space.
Film Roll Web Handling
Positions a cutting carriage on a flexible film web line, relying on the adjustable end cushions to stop the 980 mm stroke smoothly without tearing the material.
Is the Airtac SE32 Standard Cylinder SE32X980S the Right Cylinder?
At 0.5 MPa, this 32 mm bore generates 402 N of push force. If your application requires less force, there is no smaller standard ISO 15552 bore in the AirTAC line, so you must look at compact cylinder series instead. If you need to step up to the next size, the 40 mm bore yields 628 N of push at 0.5 MPa. Remember that a plain SE cylinder does not hold its position if air pressure drops or the valve centers; the piston will drift. Use a BSE rod lock for fail-safe holding.
Because the 980 mm stroke exceeds the 1000 mm maximum standard stroke for this bore, it is made-to-order. At this extended length, the 12 mm rod is highly susceptible to side-load bending and sagging. You must use an external guide rail to prevent rod-bearing damage and stick-slip chatter.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X980S FAQ
The SE32X980S generates 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 563 N. The maximum allowable push force is 82 kgf at 1.0 MPa.
Yes, the SE32X980S is dimensionally interchangeable with other ISO 15552 profile cylinders and shares standard mounting hardware. It features a PT1/8 port and a built-in magnet compatible with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X980S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.