Airtac SE80 Standard Cylinder SE80X118
The AirTAC Airtac SE80 Standard Cylinder SE80X118 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 118mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke118 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X118
The AirTAC SE80X118 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing no vulnerable hardware to the working environment.
This 80 mm bore unit features field-adjustable pneumatic cushioning at both stroke ends, allowing technicians to dial in end-of-stroke deceleration via a set screw rather than relying on a fixed rubber bumper. This specific SKU is provisioned without a built-in magnet, meaning it is not wired for CMSE or DMSE position sensing out of the box.
Airtac SE80 Standard Cylinder SE80X118 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X118 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 118 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X118
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×118 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X118 Is Used
CNC Fixture Clamping
Exerts 2513 N of extend force at 0.5 MPa to lock heavy cast iron engine blocks securely against a machining table during high-speed milling operations.
Pallet Diverter Arm
Uses the 118 mm stroke to extend a routing flap on a packaging line, redirecting heavy wooden pallets onto a spur track without stalling the main conveyor.
Injection Mold Ejection
Provides the 2268 N retract force necessary to pull a stripper plate back on a mid-sized plastic injection mold, breaking the vacuum on deep-draw parts.
Is the Airtac SE80 Standard Cylinder SE80X118 the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your exact thrust margin: the SE80X118 provides 2513 N of push at 0.5 MPa, but if your load requires less force, stepping down to the 63 mm bore drops the output to 1559 N, saving valuable air volume and physical footprint. If your application demands higher authority, moving up to the 100 mm bore increases the 0.5 MPa push to 3927 N. Because this is a standard double-acting cylinder, it cannot hold a load unpowered—any vertical or gravity-opposing load will drift when air is exhausted or the valve centers, requiring a BSE rod lock or external check valve for secure positioning. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for any compliant ISO 15552 actuator, utilizing the same mounting accessories and PT3/8 port interface.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X118 FAQ
This 80 mm bore cylinder generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N. The absolute maximum push capacity is 513 kgf when operated at the maximum rated pressure of 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other standard profile cylinders using identical mounting hardware. This specific SKU lacks the -S magnet option, so it cannot host CMSE or DMSE sensors without modifying the piston assembly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X118
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.