Airtac TACED Guided Compact Cylinder TACED32X35
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X35 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X35
A double acting, double-rod compact cylinder built to ISO 21287, the TACED32X35 pushes a 32 mm bore through a 35 mm stroke with a rod leaving both covers. Because each side works on the rod-side area, output is identical in both directions: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, equal push and pull. Twin guide rods on the yoke stop the load rotating and carry side load, so a gripper or press plate stays square without an external guide.
The hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, which is what lets it slot into tight jigs, guards and gantry frames. In practice, plan on roughly 207 N of usable work at 0.5 MPa, and for vertical lifts that translates to about 17 kg of part weight with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke shock, the S45C hard-chrome rod resists wear, and the female M8x1.25 rod thread takes standard tooling directly.
Airtac TACED Guided Compact Cylinder TACED32X35 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X35 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X35
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X35 Is Used
Fixture clamping on CNC pallets
The equal 345.6 N clamp and unclamp force both ways suits pallet clamps on machining centres, where the 35 mm stroke clears the fixture and the twin guide rods keep the clamp pad square to the part.
Pusher stations on packaging lines
With about 207 N of practical work at 0.5 MPa, the cylinder pushes cartons or trays sideways on a conveyor, and the short ISO 21287 body fits between guard rails where a full-length cylinder cannot.
Non-rotating gripper actuation
The twin guide yoke carries side load and stops rotation, so a two-jaw gripper on a small assembly cell stays aligned without an external guide rail, cycling at speeds from 30 to 500 mm/s.
Is the Airtac TACED Guided Compact Cylinder TACED32X35 the Right Cylinder?
At 345.6 N per direction, the 32 mm bore sits in the mid range: step down to the 25 mm bore (206.2 N) for lighter pick-and-place, or up to the 40 mm bore (571.8 N) when clamping forces climb. The 35 mm stroke is well inside the standard range for this bore, so no made-to-order build is needed. This version has no magnet, so position sensing is not possible; order the TACED32X35S if you need CMSE or DMSE switches. Mounting is FB flange, the rod end is female M8x1.25, and the port is 1/8" PT. Remember it drifts when air is lost, so add a rod lock or pilot check valve if a load must be held.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X35 FAQ
Yes, identical both ways because the double-rod design exposes the rod-side area on each side: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the port is 1/8" PT with a female M8x1.25 rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke shock. This model has no magnet, so no switch can be mounted; order the TACED32X35S variant to enable CMSE or DMSE reed or solid-state switches along the body's magnet slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.