Airtac TACED Guided Compact Cylinder TACED63X30
The AirTAC Airtac TACED Guided Compact Cylinder TACED63X30 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 30mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X30
Double acting and double rod, the TACED63X30 pushes and pulls with the same 1458.1 N at 0.5 MPa (2041.3 N at 0.7 MPa), because a rod exits both covers and each side works on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The 63 mm bore gives a peak 297.4 kgf at 1.0 MPa for the heaviest jobs in this range.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this size fits tight jigs, guards and gantries. A hard-anodized aluminium body with a roller-burnished bore runs against an S45C hard-chrome plated 16 mm rod, with a fixed TPU bumper at each end. For vertical lifting, halving the 0.5 MPa force leaves roughly 74 kg of safe lift capacity, enough to match a real part weight before you order.
Airtac TACED Guided Compact Cylinder TACED63X30 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X30 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X30
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X30 Is Used
CNC fixture clamping
The 1458.1 N closing force in both directions clamps and releases machined aluminium housings on a jig, with the twin guide rods keeping the clamp plate square to the fixture.
Pallet lift-and-lower station
About 74 kg of practical vertical lift at a 2:1 margin raises small pallets of bottled product on a packaging line, and the equal pull force lowers them under full control.
Conveyor pusher arm
A 30 mm stroke is enough to divert cartons between conveyor lanes, and the non-rotating yoke keeps the pusher blade aligned lane after lane at speeds up to 500 mm/s.
Is the Airtac TACED Guided Compact Cylinder TACED63X30 the Right Cylinder?
At 1458.1 N per direction, bore 63 suits clamping and lifting in the 100-150 kgf class; step down to bore 50 (881.2 N) for lighter tooling or up to bore 80 (2356.2 N) for heavy presses. The piston drifts if air is lost, so add a rod lock or pilot check valve where a load must be held. Ports are 1/8" on this bore, the rod end carries a female M10x1.5 thread, and FB flange mounting is available. Order the -S code if you need the optional magnet for CMSE / DMSE switches; without it no sensor can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X30 FAQ
Force is equal in both directions because the double-rod design works on the rod-side area: 1458.1 N at 0.5 MPa, 2041.3 N at 0.7 MPa, and a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), speed range 30-500 mm/s, and air filtered to 40 um.
It is an ISO 21287 compact cylinder, roughly 50% shorter in mounting length than an ISO 15552 profile cylinder, with a hard-anodized aluminium body, threaded aluminium covers, an S45C hard-chrome rod and a fixed TPU bumper at each end that decelerates the piston at stroke ends. Sensing requires the optional -S magnet at ordering; with it, CMSE or DMSE switches mount in the body slots. Without -S there is no magnet and no sensor can be read.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.