Airtac 2WL High Pressure Solenoid Valve 2WL05015AI
2. Wide pressure range adaptability: Available in Ultra-High Pressure (X), High Pressure (H), Standard, Large Flow (L), and Extra-Large Flow (T) configurations;
3. Compact design with reduced dimensions and lightweight construction for easy installation/maintenance;
4. Brass valve body with Class B thermal-rated coil. Standard FPMF (Fluorocarbon Rubber) seals compatible with multiple media. Custom seal materials available upon consultation with technical department;
5. IP65-rated coil protection. Wiring options: Direct lead wire or DIN connector.
Category: High Pressure Solenoid Valves | Brand: Airtac | Series: 2WL
AirTAC 2WL High-Pressure Solenoid Valve 2WL05015AI Technical Details
- Model: 2WL05015AI
- Type: 5/2-way normally closed (pilot-operated high-pressure design)
- Port size: G1/8 (ISO228 standard)
- Operating pressure range: 0.5-21 MPa (7-3,046 PSI)
- Maximum pressure rating: 25 MPa burst pressure
- Voltage options: DC24V (±10%), AC110V 50/60Hz, AC220V 50/60Hz
- Coil insulation class: Class F (155℃)
- Weight: 600g ±3% (including coil and connector)
- Dimensions: 95mm(L) × 52mm(W) × 76mm(H)
- Seal material: FKM fluorocarbon rubber
- Temperature range: -10℃ to 120℃ (non-freezing environment)
- Response time: ≤15ms (open), ≤20ms (close) @20℃
- Flow capacity: 850 l/min (Cv=1.2) @7 bar
- Protection rating: IP65 (coil)/IP40 (valve body)
- Port thread tolerance: ISO1179-B metric standard
- Lubrication: Oil-free operation recommended
Heavy-duty high-pressure solenoid valve engineered for industrial hydraulic systems requiring precise directional control under extreme pressures. Features triple-sealed coil assembly with overcurrent protection and anti-vibration spool design. Requires 10μm filtration with automatic drain.
- Injection molding machine clamp mechanisms
- Die-casting equipment hydraulic circuits
- Hydraulic press cylinder control systems
- High-pressure test bench manifolds
- Steel mill hydraulic bender units
Installation protocol:
Mount horizontally with arrow aligned to flow direction. Allow 15mm clearance for heat dissipation.
Use torque limiter (15-20N·m) during port connection. Perform monthly manual override tests.
Critical note:
Requires minimum 18V DC/85% rated voltage during cold start (-10℃).
Not compatible with phosphate ester fluids or chlorinated solvents.
| Property | Property Value |
|---|---|
| sku | 2WL05015AI |
| Port Size | PT 1/2 |
| Flow Aperture | 7mm |
| Coil Voltage | AC220V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.