Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X130-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X130-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø50mm bore and 130mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ50 mm
- Stroke130 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X130-10S
When a setup needs repeatable stop positions only millimetres apart, the 10 mm window on this MACJ50X130-10S is the tool: screw the stop in or out for fine trim of the 130 mm extend stroke, while both air cushions stay independently adjustable. At 0.5 MPa the bore delivers 981 N forward and 880.8 N back.
Derated to about 589 N of continuous work, the output is still well past a 32 mm cylinder's, yet the riveted stainless body with its chrome-plated rod shrugs off splash that would pit a painted mini. A magnet comes standard, so CMSG, DMSG or EMSG reed switches clamp on for repeatability checks.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X130-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X130-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø50 mm |
| Stroke | 130 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X130-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 50 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X130-10S Is Used
Gauging fixture on a QC bench
The 10 mm trim band sets stop depth per part variant; 981 N at 0.5 MPa seats dial indicators without overtravel.
Nozzle depth set on a filling head
Operators twist the stop screw between bottle formats; cushions keep the 130 mm dive smooth at up to 800 mm/s.
Tooling stop on a press brake back-gauge
Fine 10 mm adjustability matches die changes, with the LB foot anchoring the body to the gauge rail.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X130-10S the Right Cylinder?
Go down to a 32 mm MACJ (402 N push at 0.5 MPa) if your load sits under 400 N, or up to the 63 mm bore (1558 N) past 900 N working load; 50 mm with its 589 N usable figure covers the middle ground. The FA flange and LB foot are the mounting choices, with I and Y knuckles available, and the standard-built magnet makes sensor retrofits a bolt-on job later. Treat the -10 stop as an extend-side position set only - it is not a mid-stroke lock, and the rod will drift if supply pressure disappears.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X130-10S FAQ
At 0.5 MPa: 981.3 N push and 880.8 N pull. At 0.7 MPa: 1373.8 N push and 1233.1 N pull. Theoretical maximum force is 200.1 kgf at 1.0 MPa. Supply runs 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
No. The barrel is high-precision stainless steel rolled onto aluminium covers, and the 16 mm rod is carbon steel with a 20 um hard-chrome plate - a combination that resists washdown chemicals and outdoor condensation far better than painted minis, with an M14x1.5 rod thread and 1/4" port for plumbing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X130-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.