Airtac TN Double Axis Double Rod Cylinder TN10X40S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X40S is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN10X40S
The TN10X40S is a double-acting twin-rod cylinder: two parallel rods on one shared plate resist bending and twisting, so the load mounts without rotating. This bore 10, 40 mm stroke unit delivers 78.5 N of push thrust at 0.5 MPa (the push side is higher than the pull side), and an external bumper pad both cushions impact and adjusts the effective stroke over -5 to 0 mm.
This is a genuine AirTAC part built to the ENTERPRISE-standard TN series, running on air filtered to 40 um at 0.2-1.0 MPa (29-145 psi) and -20 to 70 C at 30-500 mm/s. A magnet is fitted as standard with magnetic-switch slots around the body, and overall dimensions for this stroke are per the datasheet; we confirm sizing on request.
Airtac TN Double Axis Double Rod Cylinder TN10X40S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X40S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 10 gives 78.5 N push thrust at 0.5 MPa; step up to bore 16/20/25/32 if you need more force. TN is the enterprise-standard series with PT ports only; choose the JIS-standard TR series instead if you need a precise guide grade or G/NPT threads. This 40 mm stroke sits within the bore 10 stroke table, but keep strokes modest on this short-cover series and confirm side-load limits with us before specifying.
Applications
Conveyor line pusher
Pushes small parts squarely off a conveyor at a reject or divert station; the twin rods keep the push plate from twisting under off-center parts.
Fixture clamp
Clamps lightweight workpieces in a drill or assembly fixture, holding the clamp pad flat against the part without rotation.
Small-part lift
Lifts small trays or lids between levels in a compact station, with both rods sharing the load to resist tipping.
FAQ
What does the S in TN10X40S mean, and is a non-magnetic version available?
S indicates the magnet is fitted. Every TN-series model carries a magnet as standard, with switch slots around the body for position sensing; there is no non-magnetic option in this series. Note also that TN is offered with PT threads only.
Will the twin rods keep my load from rotating during the stroke?
Yes. The two parallel rods on one shared plate resist bending and twisting, so the mounted load moves without rotating. Allowable side-load is published only as curves and overall dimensions vary by stroke, so confirm both from the datasheet.