Airtac TN Double Axis Double Rod Cylinder TN10X50S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X50S is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN10X50S
This TN twin-rod, double-acting cylinder uses two parallel rods on one shared plate, giving resistance to bending and twisting and a load mount that does not rotate. With a 10 mm bore and 50 mm stroke, it produces roughly 78.5 N of theoretical push thrust at 0.5 MPa, and the external bumper cushions impact while adjusting the stroke over -5 to 0 mm.
TN10X50S is a genuine AirTAC part to the enterprise standard, supplied with a magnet as standard and magnetic-switch slots around the body. It runs on air filtered to 40 um at 0.2-1.0 MPa (29-145 psi) for this bore. Overall dimensions for your stroke are confirmed from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN10X50S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X50S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
The 10 mm bore gives about 78.5 N of push thrust at 0.5 MPa (the pull side is lower); move to TN bore 16 or larger for more force. Stroke 50 mm is within the TN10 table, but keep strokes conservative on this small bore since the short front cover limits rod exposure on very long strokes - check with us. Thread is PT only on TN; TR is the JIS-standard alternative with PT, G and NPT options plus a more precise guide. Side-load capacity is published as curves, so route your application to us for confirmation.
Applications
Belt-line reject pusher
Kicks off-spec parts off a sorting conveyor. The twin rods prevent the pusher plate from rotating, so even thin parts are pushed squarely instead of being tipped sideways.
Assembly fixture clamp
Holds small housings or brackets against a fixture stop during screwdriving. The plate bolts straight to the clamp arm, and the twin-rod build keeps the clamping face non-rotating.
Nest-to-nest transfer
Slides small components between work nests on a compact automation station. The shared plate offers a stable mount for the transfer blade at both ends of the 50 mm stroke.
FAQ
TN or TR - which twin-rod series should I pick?
TN is the enterprise-standard twin rod and is offered with PT threads only. TR is the JIS-standard version with PT, G and NPT thread choices and a more precise guide with two groups of ports. If you need G or NPT or tighter guide accuracy, choose TR.
How much side load can the plate carry?
The twin rods give strong resistance to rotation, but allowable side load and rod-end deflection are published only as curves, not as single numbers. Send us your load and mounting details and we will confirm from the datasheet.