Airtac TN Double Axis Double Rod Cylinder TN20X150S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN20X150S is a genuine TN twin-rod (double-rod) double-acting cylinder, 20 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 314.2 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore20 mm
- Push thrust @0.5 MPa314.2 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN20X150S
The TN20X150S is a double-acting twin-rod cylinder: two parallel rods on one shared plate hold the load against rotation while resisting bending and twisting forces. With a 20 mm bore and 150 mm stroke it delivers a theoretical push thrust of 314.2 N at 0.5 MPa (pull side is lower), fitting pushers, clamps and stoppers that need a stable, non-rotating face. The front bumper both cushions impact and adjusts stroke over -5 to 0 mm.
This is a genuine AirTAC part to the TN enterprise standard, with PT thread ports on the 20 mm bore. The magnet is standard on every TN model, with magnetic-switch slots around the body. Operating pressure is 0.15-1.0 MPa (22-145 psi) for this bore, using air filtered to 40 um; proof pressure is 1.5 MPa (215 psi), temperature -20 to 70 C and speed 30-500 mm/s. Ask us to confirm overall dimensions and sizing from the datasheet.
Airtac TN Double Axis Double Rod Cylinder TN20X150S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN20X150S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 314.2 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Match the bore to your thrust: the 20 mm bore here gives 314.2 N theoretical push at 0.5 MPa, with the pull side lower. Within the twin-rod range, TN is the enterprise-standard version (PT thread only), while TR is the JIS-grade precise guide with G, NPT and PT options - pick TR where non-rotating accuracy matters most. This 150 mm stroke is drawn from the bore-20 stroke table; consult the datasheet for other strokes and avoid over-long strokes, discussing any short-cover case with us. For side-load capacity, request the datasheet curves from us.
Applications
Part locating and positioning
The plate carries a locating nest that indexes parts into a fixture without rotating, so the same orientation is presented to the next station every cycle.
Tote and tray transfer
Mounted horizontally over the 150 mm stroke, the plate slides totes between conveyor lanes or into a rack position, staying flat thanks to the twin-rod guide.
Adjustable end stop
Used as a stopper for parts or fixtures, the bumper cushions arrival and its -5 to 0 mm stroke adjustment lets operators fine-tune the exact stop position.
FAQ
What does the 150 mm stroke of the TN20X150S mean in practice?
The plate travels 150 mm between retracted and extended positions, and the front bumper can reduce the effective stroke by up to 5 mm. Confirm overall dimensions for this stroke and other table entries from the datasheet before fixing your layout.
Can the plate take a twisting load without rotating?
Yes. The two parallel rods share one plate, so mounted loads resist bending and twisting and do not rotate during travel. For exact allowable side-load values, contact us - they are published only as datasheet curves.