Airtac TN Double Axis Double Rod Cylinder TN20X200S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN20X200S is a genuine TN twin-rod (double-rod) double-acting cylinder, 20 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 314.2 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore20 mm
- Push thrust @0.5 MPa314.2 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN20X200S
The TN20X200S is a double-acting twin-rod cylinder with two parallel rods on one shared plate, giving resistance to bending and twisting so the load mounts without rotating. The 20 mm bore provides a theoretical push thrust of 314.2 N at 0.5 MPa (the push side is higher than the pull side), and the 200 mm stroke covers longer transfer, lift and eject moves. An external bumper both cushions impact and adjusts the effective stroke over -5 to 0 mm.
This is a genuine AirTAC part made to the TN enterprise standard; PT is the only port thread on this series. The magnet is fitted as standard on the whole series, with magnetic-switch slots around the body, so no retrofit is needed for sensing. Mounting is embedded and fixed, with three-side holes on the plate and multi-face holes on the body. We confirm exact dimensions for the 200 mm stroke from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN20X200S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN20X200S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 314.2 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select bore 20 when you need about 314 N of push at 0.5 MPa - the 10 and 16 mm bores in this family deliver less. TN is the enterprise-standard twin-rod series; TR is the JIS-standard alternative with higher non-rotating precision, a lengthening sliding guide needing no added lubricant and two groups of ports, one each side. 200 mm is a valid entry in the bore's stroke table, but respect the short-cover caution on very long strokes and keep overhung loads minimal. Thread is PT only on TN. For side-load figures, which are published as curves rather than numbers, route the application to us and we will confirm from the datasheet.
Applications
Pick-and-place plate
Mount a gripper plate for pick-and-place moves over 200 mm. The twin rods keep the plate from rotating between the pick point and the place point.
Lane diverter
Slide packages across between two conveyor lanes. The shared plate carries the guide shoe square at both ends of the 200 mm stroke.
End-of-line stopper
Deploy a stop at the end of a production line to queue parts. The plate stays level under the stopping load, so the blade meets parts flat.
FAQ
Is TN20X200S the same cylinder as TN20X200-S?
Yes. The hyphen is only a listing style. Both decode the same way: TN enterprise-standard twin-rod cylinder, 20 mm bore, 200 mm stroke, magnet standard (the S), and PT ports (blank thread code). TN never offers G or NPT threads - only the TR series does.
How much side load can the rods take?
Side-load capability is published as curves, not a single number, so we do not quote a figure here. Send us the load and layout and we will confirm it, along with exact dimensions for the 200 mm stroke, from the datasheet.