Airtac TN Double Axis Double Rod Cylinder TN20X30S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN20X30S is a genuine TN twin-rod (double-rod) double-acting cylinder, 20 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 314.2 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore20 mm
- Push thrust @0.5 MPa314.2 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN20X30S
The AirTAC TN20X30-S is a double-acting twin-rod cylinder with a 20 mm bore and a 30 mm stroke. Two parallel rods on one shared plate resist bending and twisting, keeping the load from rotating as it moves. At 0.5 MPa the push-side thrust is 314.2 N, and the front bumper pad cushions impact while adjusting the effective stroke across -5 to 0 mm.
This is a genuine AirTAC TN-series part built to the enterprise standard with PT thread ports. The magnet is standard on every model, and magnetic-switch slots run around the body. We confirm exact dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN20X30S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN20X30S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 314.2 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
The 20 mm bore delivers about 314 N of push thrust at 0.5 MPa. The TN series follows the enterprise standard and provides PT thread ports only; for JIS-standard G or NPT threads or the precise sliding guide, the TR series is the alternative. The 30 mm stroke suits short-travel push and lift jobs; avoid strokes that exceed the short-cover deflection limit. We confirm the allowable side load from the datasheet curves.
Applications
Alignment Push Bar
Squaring bar that pushes a carton against a side guide before labeling. The 30 mm stroke and twin-rod anti-rotation keep the bar parallel across the carton width.
Pallet Lift Stopper
Deploys a stop block to catch a pallet edge on a roller conveyor. Twin rods hold the block square against the pallet's momentum without rotating.
Tool Change Positioner
Indexes a small tooling plate 30 mm forward to a waiting position. The parallel rods prevent the plate from yawing as it extends into the work envelope.
FAQ
How much thrust does the 20 mm bore produce?
At 0.5 MPa the push-side thrust is 314.2 N. The pull side is lower. The operating pressure range for the 20 mm bore is 0.15 to 1.0 MPa (22 to 145 psi).
Can you confirm dimensions and side-load limits?
Overall dimensions vary with stroke and allowable side load is published as curves. We confirm both from the datasheet on request rather than listing them here, so you get the correct figures for your mounting orientation.