Airtac TN Double Axis Double Rod Cylinder TN25X200S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X200S is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X200S
A twin-rod cylinder uses two parallel rods on a shared plate to resist bending and twisting, so the load travels without rotating. This AirTAC TN25X200S pairs a 25 mm bore with a 200 mm stroke; at 0.5 MPa the push thrust is 490.9 N. The external bumper cushions impact and adjusts the stroke over a -5 to 0 mm range.
This is a genuine AirTAC part built to the enterprise standard with a standard magnet and magnetic-switch slots around the body. TN cylinders use PT threads only. We confirm dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X200S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X200S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose this 25 mm bore when you need the 490.9 N push at 0.5 MPa that the twin-rod design delivers. TN is the enterprise-standard series with PT ports only; the TR series adds JIS mounting, higher non-rotating precision, a lengthening sliding guide, and a choice of PT, G, or NPT threads. The 200 mm stroke is within the bore's table, but long strokes on the short-cover body raise rod deflection - confirm allowable side-load with us before ordering.
Applications
Push-Off Station
Mounts at the end of a conveyor to push rejected parts sideways off the belt; the twin rods keep the pusher plate square so the part exits cleanly without rotation.
Clamp Actuator
Holds a workpiece against a fixture during machining; the anti-rotation rods prevent the clamp arm from twisting under cutting load for repeatable clamping force.
Vertical Lift Gate
Raises a stop gate between two process stations; the two rods guide the gate straight up without bind even when the load sits off-center on the plate.
FAQ
How does the TN25X200S compare to the TR series?
TN is the enterprise-standard twin-rod cylinder with PT threads only. TR adds the JIS standard, higher non-rotating precision, a lengthening sliding-support guide that needs no added lubricant, and a choice of PT, G, or NPT threads. If your application needs tighter rotation control, consider a TR model instead.
Is the magnet optional on this cylinder?
No. Every TN and TR model is magnet-fitted as standard, with magnetic-switch slots around the body for position sensing. There is no non-magnetic variant to choose.