Airtac TN Double Axis Double Rod Cylinder TN25X50S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X50S is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X50S
The AirTAC TN25X50-S is a double-acting twin-rod cylinder with a 25 mm bore and a 50 mm stroke. Two parallel rods on a shared plate resist bending and twisting, so the mounted load translates without rotating. At 0.5 MPa the theoretical push thrust is 490.9 N, and an external bumper cushions end-of-stroke impact while allowing adjustment from -5 to 0 mm.
This is a genuine AirTAC part built to the enterprise standard. A magnet is standard on every unit, with switch slots moulded around the body. We confirm overall dimensions and sizing details from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X50S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X50S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 25 gives a theoretical push thrust of 490.9 N at 0.5 MPa (pull is lower). The TN series follows the enterprise standard and offers PT thread only. Stroke 50 mm is within the bore 25 range, but the short-cover design means you should keep the stroke moderate to avoid excessive rod-end deflection. Contact us to confirm allowable side-load data from the published curves.
Applications
Carton Pusher
Pushes cartons from one belt onto a perpendicular belt; twin rods keep the pusher plate flat so each carton transfers squarely without skewing.
Gripping Finger Stop
Extends a stop block in a pick-and-place cell; the twin rods prevent the block from tilting so a robot gripper lands parts on a consistent datum.
Pallet Lift Pin
Raises a locating pin between rollers to position a pallet for filling; anti-rotation rods keep the pin tip centred under the pallet hole.
FAQ
What thread options does TN offer?
The TN series provides PT thread only. If you need G or NPT ports, consider the TR series instead, which offers all three thread standards.
How does the twin-rod design help?
Two parallel rods on one shared plate resist bending and twisting, so the load mounts and travels without rotating. This makes the cylinder well suited to pushers, clamps and stops that must stay square to the work.