Airtac TN Double Axis Double Rod Cylinder TN25X60S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X60S is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X60S
A twin-rod cylinder uses two parallel rods on one shared plate to resist bending and twisting, letting the load move without rotating. This TN25X60S has a 25mm bore and a 60mm stroke, suitable for push, transfer, or lift operations where anti-rotation stability is required. At 0.5 MPa the push thrust is 490.9 N. The external bumper cushion both absorbs impact and adjusts the effective stroke by -5 to 0 mm.
This is a genuine AirTAC TN-series part built to the enterprise standard. The magnet is standard on every model with magnetic-switch slots around the body. We confirm exact dimensions, sizing, and material details from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X60S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X60S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Pick the bore for the thrust you need: the 25mm bore delivers 490.9 N push at 0.5 MPa, with the pull side slightly lower due to rod area. TN is the enterprise-standard twin-rod with PT thread only; for JIS mounting, the precise sliding guide, or G/NPT threads, see the TR series. A 60mm stroke is mid-range; confirm allowable side load from the datasheet curves before mounting an offset load. We confirm all figures on request.
Applications
Part Ejector
Pushes a finished component out of a machining fixture across a 60mm stroke. The twin rods resist rotation so the ejector pad stays aligned and the part releases cleanly without binding.
Lateral Transfer
Transfers a wafer or flat panel sideways between two process stations. Anti-rotation keeps the carrier plate level through the full 60mm travel so the workpiece does not tilt.
Lift Stage
Raises a pallet or tray 60mm to align it with a downstream conveyor. The twin-rod guide prevents the load from twisting or rotating during the lift, keeping the pallet square.
FAQ
Is the magnet optional on this cylinder?
No. The magnet is standard on every TN and TR twin-rod model in this series. There is no non-magnet option. Magnetic-switch slots are provided around the body for position sensing.
What does twin-rod anti-rotation mean in practice?
Two parallel rods on a shared plate resist bending and twisting moments so the load moves linearly without rotating. This makes twin-rod cylinders suited to clamping, pushing, and lifting where the tooling must stay square to the work.