Airtac TN Double Axis Double Rod Cylinder TN25X95S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X95S is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X95S
The TN25X95S is a double-acting twin-rod cylinder whose two parallel rods carry one shared load plate: the plate does not rotate under load and the pair of rods resists bending and twisting. The 25mm bore with a 95mm stroke suits longer push, transfer and stopper motions, delivering 490.9 N of theoretical push at 0.5 MPa, while the external front bumper cushions impact and adjusts the effective stroke over -5 to 0 mm.
You are ordering a genuine AirTAC part to the enterprise-standard TN series: PT ports, magnet fitted as standard with magnetic-switch slots around the body, and an operating pressure of 0.15-1.0 MPa (22-145 psi) on air filtered to 40 um, -20 to 70 C. Exact dimensions for the 95mm stroke and any sizing questions are confirmed from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X95S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X95S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
At 0.5 MPa this 25mm bore gives 490.9 N theoretical push; the pull side is lower, so check the return as well. Up one size, the 32mm bore offers 804.2 N; down one, the 20mm bore gives 314.2 N. TN is the enterprise-standard twin-rod series with PT threads only - choose the JIS-standard TR series instead if you need G or NPT ports or its precise guide grade: higher non-rotating accuracy, low rod-end deflection and a lengthening sliding-support guide that needs no added lubricant. Confirm the 95mm stroke against this bore's stroke table, and be careful with over-long strokes on a short cover. Side-load limits are curve-based only - tell us your load and we will check it.
Applications
Transfer slide between two fixtures
Carries a small part or sub-assembly 95mm from load station to process station. The twin-rod plate stays level and non-rotating, so the part arrives oriented without a separate guide rail.
Press-assist for light assembly
Helps seat bearings, bushings or plugs before a final press. Two rods keep the pressing plate parallel to the part, 490.9 N of push at 0.5 MPa handles light interference fits, and the bumper softens the bottom of stroke.
Index stopper on rotary dial tables
Extends into the fixture path to lock each dial position. The twin rods take the twisting reaction from off-centre parts, and the standard magnet signals lock and release to the PLC.
FAQ
TN or TR - how do I choose between the two twin-rod series for this application?
Both are double-acting twin-rod cylinders with a non-rotating plate, but TN is the enterprise-standard series with PT threads only, while TR is the JIS-standard, guide-grade series with PT, G or NPT threads, higher non-rotating accuracy, low rod-end deflection and a lengthening sliding-support guide that needs no added lubricant. If your application is a general push, clamp or stopper, TN25X95S is the economical choice; if positioning precision is critical, pick the TR equivalent.
What does the bumper do at the end of the 95mm stroke?
It is an external pad on the front of the cylinder, not an air cushion. It cushions the impact of the plate reaching end of stroke and also adjusts the effective stroke over -5 to 0 mm, letting you trim the final position of the load plate without changing the cylinder.