Airtac TN Double Axis Double Rod Cylinder TN32X10S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X10S is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X10S
The TN series is a double-acting twin-rod cylinder: two parallel rods carry one shared mounting plate, so the plate resists bending and twisting and the load mounts without rotating. With a 32mm bore and a short 10mm stroke, this unit suits compact, high-thrust moves - at 0.5 MPa it delivers a theoretical push thrust of 804.2 N (the pull side is lower). A bumper on the front of the body both cushions end-of-stroke impact and adjusts effective stroke over -5 to 0 mm.
This is a genuine AirTAC part built to the TN enterprise standard, with PT thread ports (1/8 in. on this bore) and a position-detection magnet fitted as standard, with switch slots around the body. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), from -20 to 70 C, at 30-500 mm/s. Overall dimensions vary with stroke, so we confirm exact dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X10S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X10S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 32 gives 804.2 N of theoretical push thrust at 0.5 MPa - if that is more than the job needs, step down to a 20 or 25mm bore in the same series. The real choice within the twin-rod range is enterprise-standard TN (this unit, PT thread only) versus JIS-standard TR; TR adds higher non-rotating precision, a lengthening sliding-support guide that needs no added lubricant, and two groups of ports, one each side. Keep the stroke only as long as the application requires - long twin-rod strokes amplify side loads at the plate, and we confirm side-load limits from the datasheet curves.
Applications
Short-stroke workpiece clamp
Clamps a machined part against a fixture on an assembly or machining station. The 10mm stroke clears and re-clamps quickly, the twin-rod plate stays square to the part, and the 32mm bore supplies 804.2 N of push force at 0.5 MPa.
Conveyor stopper gate
Extends a stop face across a conveyor line to index or gate parts. Because the plate cannot rotate, the stop face stays square to the product flow, and the front bumper cushions each part stop while trimming stroke over -5 to 0 mm.
Part ejector at the nest
Pushes finished components out of a nest or chute at the end of a cycle. The two parallel rods keep the push plate from twisting under off-center parts, so even awkwardly shaped pieces are ejected straight.
FAQ
What does the S in TN32X10S mean, and is a non-magnetic version available?
S simply marks the magnet. Every TN twin-rod cylinder is magnet-fitted as standard for magnetic-switch position sensing, with switch slots around the body - there is no non-magnetic option to choose. The thread code after S is blank here, which on TN means PT ports.
Can I hang a side load on the mounting plate?
The twin rods give strong resistance to bending and twisting, so the plate carries loads without rotating, but published side-load and rod-end deflection limits are given as curves rather than single numbers. Send us your load and stroke and we will confirm the allowable values from the datasheet. The front bumper also lets you adjust effective stroke over -5 to 0 mm while cushioning impact.