Airtac TN Double Axis Double Rod Cylinder TN32X120S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X120S is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X120S
This TN twin-rod cylinder uses two parallel rods on one shared plate, giving resistance to bending and twisting so the mounted load never rotates. The 32mm bore with a 120mm stroke covers longer transfer and lift movements while still delivering a theoretical push thrust of 804.2 N at 0.5 MPa (the pull side is lower). A front bumper cushions end-of-stroke impact and adjusts effective stroke over -5 to 0 mm.
The unit is a genuine AirTAC part to the TN enterprise standard, with PT thread ports (1/8 in. on this bore) and a magnet fitted as standard, with magnetic-switch slots around the body. It operates on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), -20 to 70 C, at 30-500 mm/s. Dimensions scale with the 120mm stroke, so we confirm exact overall dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X120S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X120S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
At 0.5 MPa the 32mm bore gives 804.2 N theoretical push - more than enough for transfer, lift and stopper duty, but drop to a 25mm bore if thrust is surplus. TN is the enterprise-standard series with PT thread only; if you need G or NPT ports, or TR's higher non-rotating precision and lengthening sliding-support guide with no added lubricant, choose the JIS-standard TR series instead. 120mm is already a long twin-rod stroke, so keep it only as long as the task needs - long strokes amplify side loads at the plate, and we confirm side-load limits from the datasheet curves.
Applications
Two-station transfer slide
Carries a tray or pallet of parts 120mm between an unload point and a process station. The twin rods keep the carried plate from rotating, so parts arrive in the same orientation they left.
Small vertical lift platform
Raises and lowers a light fixture or sorting shelf by 120mm. The two parallel rods resist the tipping that a single-rod lift suffers, keeping the platform level through the full travel.
Light press and staking station
Presses bearings, pins or snap fits into housings on a bench press. The 32mm bore applies 804.2 N of push at 0.5 MPa, and the non-rotating plate keeps the tool squared to the workpiece over the long stroke.
FAQ
Is 120mm stroke a standard choice in bore 32, and should I pick TN or TR?
Yes, 120mm sits within the bore 32 stroke table for this series. TN (this model) is the enterprise-standard twin-rod cylinder with PT thread only and a magnet fitted as standard. TR is the JIS-standard alternative with PT, G or NPT threads, higher non-rotating precision, low rod-end deflection and a lengthening sliding-support guide that needs no added lubricant - pick TR when guidance precision matters most.
Does the long stroke make side loading a problem?
The twin-rod design gives the plate strong resistance to bending and twisting, but any cylinder becomes more sensitive to side loads as stroke grows. Allowable side-load and rod-end deflection figures are published as curves rather than single numbers, so send us your load and mounting details and we confirm them from the datasheet. The adjustable bumper also cushions the stroke ends and trims effective stroke over -5 to 0 mm.