Airtac TN Double Axis Double Rod Cylinder TN32X150S

The TN32X150S is a double-acting twin-rod cylinder: two pistons and two parallel rods share one plate, so the load can be mounted directly on the plate without rotating and with strong resistance to bending and twisting. At the 32 mm bore, the push side delivers a theoretical 804 N at 0.5 MPa (the pull side is lower), which suits firm pushing, clamping and stopping duties across the 150 mm stroke. An external bumper pad cushions end-of-stroke impact and also adjusts the effective stroke over -5 to 0 mm; it is a bumper, not an air cushion.

This is a genuine AirTAC part built to the ENTERPRISE-standard TN series, with PT ports (1/8 in) and a position magnet fitted as standard, with magnetic-switch slots around the body. Operating range is 0.15-1.0 MPa (22-145 psi) on air filtered to 40 um, at -20 to 70 C. Weight and stroke-specific dimensions are not listed here; we confirm them, and your sizing, from the datasheet on request.

The 32 mm bore is the largest in the TN series and gives a theoretical push thrust of 804 N at 0.5 MPa; choose a smaller bore if your load needs less force. TN is the ENTERPRISE-standard twin-rod series and is offered with PT threads only - if you need G or NPT ports, or TR's precise guide with higher non-rotating accuracy, low rod-end deflection and two groups of ports on both sides, select the JIS-standard TR series instead. The 150 mm stroke sits within the TN 32 bore table, but take care with over-long strokes relative to the cover length - confirm the exact drawing from the datasheet. Allowable side load is published only as curves, so route your application to us and we will size it.