Airtac TN Double Axis Double Rod Cylinder TN32X200S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X200S is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X200S
The TN32X200S is a genuine AirTAC double-acting twin-rod cylinder. Two parallel rods on a single shared plate give the load resistance to bending and twisting and let you mount the work directly on the plate without it rotating. At 32 mm bore and 200 mm stroke it produces a theoretical push thrust of 804.2 N at 0.5 MPa (pull thrust is lower), and the external front bumper both cushions the end of stroke and trims the effective stroke over -5 to 0 mm; it is a bumper, not an air cushion.
This model belongs to the TN series, built to AirTAC's ENTERPRISE standard, with PT thread ports. The magnet is fitted as standard on the whole series - there is no non-magnetic option - with magnetic-switch slots around the body. We confirm stroke-specific dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X200S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X200S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Size by thrust: the 32 mm bore gives 804.2 N theoretical push at 0.5 MPa with lower pull-side force, suitable for heavier push, clamp and lift jobs in the TN range. TN is the enterprise-standard twin-rod series with PT thread ports only; TR is the JIS-standard alternative offering PT, G and NPT plus a higher-precision guide. Strokes follow the TN bore table, and over-long strokes call for attention to the short-cover caution - ask us before ordering. Side-load capability appears only as published curves, so route your load case to us for confirmation from the datasheet.
Applications
Machine stopper
Deployed as a stopper on an assembly conveyor, the twin-rod plate rises and presents a flat, non-rotating face that indexes parts precisely to the next station.
Press-fit assist
Applied to a light press or insertion station, the two rods share the 804.2 N push load at 0.5 MPa and keep the pressing plate square to the part.
Carton diverting
Used in a warehouse sorter to divert cartons at a junction; the anti-rotation plate keeps its pushing face aligned through the full 200 mm stroke.
FAQ
Is the magnet on the TN32X200S an optional extra?
No. Every TN series cylinder, including TN32X200S, is supplied with the magnet fitted as standard - there is no non-magnetic version. Magnetic-switch slots run around the body so switches can be mounted on any side; for specific switch part numbers, confirm from the catalogue.
What media and conditions can this cylinder run on?
It runs on air filtered to 40 um, at 0.15-1.0 MPa (22-145 psi) for the 32 mm bore, with proof pressure of 1.5 MPa (215 psi), a working temperature of -20 to 70 C and speeds of 30-500 mm/s. The front bumper cushions impact and adjusts stroke by -5 to 0 mm.