Airtac TN Double Axis Double Rod Cylinder TN32X25S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X25S is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X25S
The AirTAC TN32X25S is a double-acting twin-rod cylinder with a 32 mm bore and a 25 mm stroke. Two parallel rods on a shared plate resist bending and twisting so the load moves without rotating. At 0.5 MPa the theoretical push thrust is 804.2 N, making this bore suited to firm clamping and pushing. Impact is absorbed by an external bumper that also trims the stroke over a -5 to 0 mm range.
This is a genuine AirTAC part meeting the enterprise standard. A sintered NdFeB magnet is fitted as standard, with switch slots around the body for position sensing. Thread is PT. We confirm dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X25S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X25S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 32 gives a theoretical push of 804.2 N at 0.5 MPa, the largest in the TN range, for jobs needing firm clamping force. The TN series follows the enterprise standard with PT thread only; for JIS standard, G or NPT threads, and a precise sliding guide with higher non-rotating accuracy, look at the TR series. Stroke must stay within the bore's table to avoid excessive rod-end deflection on the short-cover body. We help you confirm allowable side-load from the datasheet.
Applications
Workpiece Clamp
Clamps a machined workpiece against a fixture with the 804.2 N push force at 0.5 MPa, using the twin rods to hold the part flat without rotation during milling or drilling.
Lane Transfer Pusher
Pushes cartons from one conveyor lane to another with a short 25 mm stroke, the twin rods keeping the pusher plate square so each box transfers squarely without skewing.
Press Stopper
Acts as a stopper pin on a stamping line, extending 25 mm to block a blank then retracting to release it, the bumper absorbing the impact of repeated cycles.
FAQ
What thrust does the TN32X25S deliver?
At 0.5 MPa the theoretical push thrust is 804.2 N, which is the push side; the pull side is lower because the rod area reduces the effective piston area. Operating pressure for the 32 mm bore is 0.15 to 1.0 MPa (22 to 145 psi).
How does the twin-rod design prevent rotation?
Two parallel rods share one mounting plate, so the load cannot rotate around a single rod axis. This resists bending and twisting, keeping the work face square to the mounting surface through the full 25 mm stroke.