Airtac TN Double Axis Double Rod Cylinder TN32X35S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X35S is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X35S
The AirTAC TN32X35-S is a double-acting twin-rod cylinder with a 32mm bore and a 35mm stroke. Two parallel rods on a shared plate resist bending and twisting, letting the load mount without rotating. It uses an adjustable external bumper that cushions impact and trims the stroke over -5 to 0 mm. Confirm the 0.5 MPa push thrust for this 32mm bore from the datasheet.
This is a genuine AirTAC part meeting the enterprise standard, with embedded fixed mounting (three-side holes on the plate, multi-face on the body). A magnet is standard on the whole series, fitting into slots around the body. We confirm dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X35S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X35S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select this 32mm bore for higher thrust (confirm the 0.5 MPa push thrust from the datasheet). The TN enterprise standard uses PT thread only, whereas the TR JIS series adds a precise sliding guide with two groups of ports.
Keep the 35mm stroke within the bore's table limits, as the short cover cautions against over-long strokes. Route any side-load questions to us to confirm from the datasheet.
Applications
Clamping Fixture
Uses the twin rods to clamp a workpiece squarely without rotation, ensuring stable holding during precision machining.
Conveyor Stopper
Acts as a stopper on a conveyor line, using the anti-rotation twin-guide rods to halt flat items squarely without skewing.
Carton Lift
Lifts cartons between stations, relying on the shared plate to prevent the load from twisting during the vertical movement.
FAQ
What is the difference between the TN and TR series?
The TN series meets the enterprise standard and uses PT thread only. The TR series meets the JIS standard, offers PT, G, and NPT threads, and adds a lengthening sliding guide for higher non-rotating accuracy.
How does the bumper adjust the stroke?
The external front bumper cushions impact and allows you to adjust the stroke over a range of -5 to 0 mm. It is a bumper, not an air cushion.