Airtac TN Double Axis Double Rod Cylinder TN32X50S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X50S is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X50S
The TN32X50S is a double-acting twin-rod cylinder: two parallel rods share one mounting plate, so the mounted load is supported at both rods and resists bending and twisting without extra guides. Its 32 mm bore produces a theoretical push thrust of 804.2 N at 0.5 MPa, and the 50 mm stroke fits mid-travel pushing, clamping and light pressing tasks. A front rubber bumper cushions impact at end of stroke and doubles as an adjustable stop, trimming the effective stroke over -5 to 0 mm.
This is a genuine AirTAC part built to the ENTERPRISE-standard TN series, with the magnet fitted as standard on the whole series so magnetic switches can be read in the slots around the body. Porting is PT threaded, 1/8 in on this bore. Exact dimensions for this stroke and any sizing checks are confirmed from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X50S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X50S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
With a 32 mm bore, this model offers a theoretical 804.2 N push at 0.5 MPa (pull side is lower); choose a different bore only if that force level is wrong for the job. TN is the ENTERPRISE-standard series and comes with PT threading only - for G or NPT ports, or for the higher non-rotating precision of the JIS-standard TR series with its lengthening sliding-support guide and two groups of ports, select TR. Stay within this bore's stroke table rather than stretching to an over-long stroke, since the bumper adjusts only -5 to 0 mm. For allowable side-load, rely on the published curves - confirm with us or the datasheet.
Applications
Light Press and Staking
Applies 804.2 N of controlled push to seat bushings, snap fits or labels, the twin rods keeping the press pad parallel to the work surface through the stroke.
Tray Transfer Pusher
Slides loaded trays from an infeed lane onto a side conveyor, the plate staying twist-free so the tray is pushed squarely instead of being shoved at an angle.
Pallet Positioning Clamp
Locks a pallet or tote against a fixed datum before robot picking, holding it without rotation so the pick point stays where the program expects it.
FAQ
What thread type does TN32X50S use - can I get G or NPT?
The TN series is supplied with PT threading only, so TN32X50S has 1/8 in PT ports. If your plant requires G or NPT connections, move to the JIS-standard TR series, which offers PT, G and NPT and adds a higher-precision guide.
Will the mounting plate rotate if my load is off-center?
The two parallel rods on a shared plate give the cylinder strong resistance to rotation, bending and twisting, which is the main reason to pick a twin-rod design. For actual allowable side-load and rod-end deflection values, use the published curves - confirm the numbers for your stroke from the datasheet or ask us.