Airtac TN Double Axis Double Rod Cylinder TN32X5S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X5S is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X5S
A twin-rod cylinder uses two parallel guide rods on a shared plate to resist bending and twisting so the load moves without rotating. The TN32X5S gives you a 32mm bore with a 5mm stroke, a very short-travel unit suited to clamping or holding positions where space is tight. At 0.5 MPa it delivers about 402 N of push thrust on the forward side (pull is lower), and an external bumper cushions impact while adjusting the effective stroke by -5 to 0 mm.
This is a genuine AirTAC part built to the enterprise standard, with a standard magnet for position sensing and PT-thread ports sized 1/8 inch. We confirm exact dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X5S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X5S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 32 fits jobs needing roughly 402 N push at 0.5 MPa; choose it over smaller bores when you need more clamping force in a short stroke. TN is the enterprise-standard series with PT threads only. Choose TR instead if you need JIS mounting, higher guide precision, a lengthening sliding guide, or G/NPT thread options. The 5mm stroke sits well within the bore's rated range; for such short travel the short cover handles the motion cleanly, but confirm allowable side-load with us before ordering.
Applications
Clamp Station
Holds a workpiece against a fixture during machining. The twin rods stop the clamp arm from rotating under off-center load so the grip stays square.
Transfer Stopper
Raises a stop blade to halt parts on a conveyor line. The 5mm stroke drops the blade just enough to clear the belt and retracts fully to let parts pass.
Pickoff Gate
Short-travel gate that pushes one item off a feed track at a time. Anti-rotation keeps the push face aligned to the part so each piece ejects cleanly.
FAQ
What thrust does the TN32X5S produce?
At 0.5 MPa the 32mm bore gives about 402 N push thrust (the pull side is lower). At 1.0 MPa it reaches roughly 804 N. Confirm your working pressure and load before sizing.
How does the bumper work on this cylinder?
The external front bumper both cushions end-of-stroke impact and trims the effective stroke by -5 to 0 mm, letting you fine-tune the stopping point. It is a bumper, not an air cushion.