Airtac TN Double Axis Double Rod Cylinder TN32X60S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X60S is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X60S
A twin-rod cylinder uses two parallel guide rods on a shared plate to resist bending and twisting so the load moves without rotating. The TN32X60-S gives you a 32mm bore with a 60mm stroke, enough travel for pushing, lifting, or transferring parts between stations. At 0.5 MPa it delivers about 402 N of push thrust on the forward side (pull is lower), and an external bumper cushions impact while adjusting the effective stroke by -5 to 0 mm.
This is a genuine AirTAC part built to the enterprise standard, with a standard magnet for position sensing and PT-thread ports sized 1/8 inch. We confirm exact dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X60S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X60S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 32 fits jobs needing roughly 402 N push at 0.5 MPa; choose it over smaller bores when you need more force for pushing or lifting. TN is the enterprise-standard series with PT threads only. Choose TR instead if you need JIS mounting, higher guide precision, a lengthening sliding guide, or G/NPT thread options. The 60mm stroke is within the bore's standard range, but with the short-cover design, confirm the allowable side-load from the datasheet before ordering long-stroke applications.
Applications
Part Transfer
Pushes a workpiece 60mm from one station to the next on a slide. Twin rods keep the pusher plate from rotating so the part stays oriented through the full travel.
Lift and Place
Raises a small fixture 60mm to present a part to a robot. Anti-rotation guide rods keep the lift platform level so the part arrives at a consistent height and angle.
Reject Pusher
Shoves a failed part 60mm off an inspection line into a reject chute. The twin-rod design holds the push face square so the part deflects cleanly into the chute.
FAQ
Is 60mm stroke suitable for the TN32 bore?
60mm is within the TN32 bore's standard stroke range. With the short-cover design, longer strokes increase side-load sensitivity, so confirm the allowable side-load from the datasheet before ordering.
Why choose TN over TR for this application?
TN is the enterprise-standard series with PT threads only and a straightforward guide. Choose TR if you need JIS mounting, higher non-rotating precision, a lengthening sliding guide that needs no added lubricant, or G/NPT thread options.