Airtac TN Double Axis Double Rod Cylinder TN32X75S

The TN32X75S is a genuine AirTAC double-acting twin-rod cylinder in the enterprise-standard TN series. Two parallel rods on a shared plate resist bending and twisting and let the load mount without rotating, while the 32 mm bore and 75 mm stroke deliver a combined theoretical push thrust of about 804 N at 0.5 MPa (pull thrust is lower). A bumper pad on the front of the body cushions impact and adjusts effective stroke over -5 to 0 mm.

The magnet comes fitted as standard on every TN model, so the magnetic-switch slots around the body are ready for reed or Hall-effect switches - there is no non-magnetic option to select. Typical materials include aluminium-alloy body and covers, NBR seals and a sintered NdFeB magnet, running on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) for this bore and -20 to 70 C. Exact dimensions and sizing are confirmed from the datasheet on request.

Choose the bore for thrust: at 32 mm this model gives about 804 N combined push thrust at 0.5 MPa, while 10, 16, 20 and 25 mm TN bores cover lighter loads. TN is the enterprise-standard series with PT thread only; TR (JIS standard) is the alternative if you want G or NPT ports plus TR's precise guide, low rod-end deflection and lengthening sliding support. The 75 mm stroke is one step in this bore's stroke table, so pick the shortest stroke that reaches your travel - over-long strokes simply add bulk. Allowable side load is published as curves rather than single numbers, so route your load case to us for confirmation.