Airtac TN Double Axis Double Rod Cylinder TN32X80S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X80S is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X80S
A twin-rod cylinder uses two parallel rods on one shared plate to resist bending and twisting so the load moves without rotating. The TN32X80S gives 804.2 N push thrust at 0.5 MPa through its 32mm bore and 80mm stroke. An external bumper cushions end-of-stroke impact and adjusts the stroke over a -5 to 0mm range.
This is a genuine AirTAC part built to the enterprise standard with a standard sintered NdFeB magnet fitted for position sensing and slots around the body for magnetic switches. Port size is 1/8 PT. We confirm exact dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X80S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X80S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Pick the 32mm bore when your task needs about 804.2 N push at 0.5 MPa; the push side delivers more force than pull on a twin-rod design. The TN enterprise series offers PT thread only; if you need G or NPT, choose the TR JIS-standard equivalent with its higher-precision guide. Keep the stroke within the bore's table range, since over-long strokes on the short-cover body increase guide wear. Route your specific side-load figures to us so we can confirm suitability.
Applications
Lane Push-Off Diverter
Mounts at a conveyor lane edge to push cartons or trays sideways off the belt into a reject or divert chute, using the twin rods to keep the pusher plate square without rotation.
Machining Clamp Arm
Drives a clamping jaw against a workpiece in a CNC fixture or assembly cell; the two-rod guide holds the clamp steady under cutting vibration and prevents the jaw from twisting.
Pallet Lift-and-Transfer
Lifts small pallets or trays between two conveyor heights in a packaging line; the shared-plate twin rods carry the offset load without the deflection-rotation a single rod would allow.
FAQ
Does the TN32X80S come with a position-sensing magnet?
Yes. Every TN and TR twin-rod cylinder in this series ships with a standard sintered NdFeB magnet fitted, with switch slots around the body. There is no non-magnet variant to select; the magnet is always included.
How does the bumper cushion work on this cylinder?
The TN32X80S uses an external front bumper pad, not an air cushion. It both softens end-of-stroke impact and lets you adjust the effective stroke over a -5 to 0mm range. Side-load capacity and exact dimensions vary with stroke, so confirm your figures from the datasheet with us.