Airtac TN Double Axis Double Rod Cylinder TN32X85S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X85S is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X85S
A twin-rod double-acting cylinder with a 32 mm bore and 85 mm stroke. Two parallel rods on one shared plate resist bending and twisting, so the load moves without rotating. At 0.5 MPa the push thrust is 804.2 N (push exceeds pull). An external bumper pad cushions end-of-stroke impact and lets you trim the effective stroke by -5 to 0 mm.
This is a genuine AirTAC TN-series part built to the enterprise standard with PT threading. A magnet is fitted as standard for position sensing, with switch slots moulded around the body. We confirm dimensions, port layout and side-load limits from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X85S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X85S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 32 delivers 804.2 N push at 0.5 MPa, so pick the bore that matches your required force. TN is the enterprise-standard twin-rod cylinder with PT ports only; if you need JIS mounting with higher non-rotating precision and G or NPT threading, consider the TR series instead. Stroke 85 mm sits within the bore 32 range; keep the stroke moderate relative to the cover length to avoid excessive rod-end deflection under side load. We confirm the allowable side-load curve for your mounting from the datasheet.
Applications
Push-off Diverter
Pushes product cleanly off a conveyor lane; the twin rods keep the pusher plate square to the belt, preventing skew as items divert at speed.
Clamp Station
Holds a workpiece flat against a machining fixture; the twin-rod design resists twist so the clamp face stays parallel under cutting load.
Pallet Stopper
Rises to halt a pallet on a roller conveyor and retracts to release it; the non-rotating rods keep the stopper blade level across the full lane width.
FAQ
What thrust does the TN32 bore provide?
At 0.5 MPa the push thrust is 804.2 N (push exceeds pull). Bore 32 operates at 0.15-1.0 MPa (22-145 psi); you can scale thrust linearly with pressure within that range.
How does the bumper cushion work?
An external bumper pad on each end cushions impact and lets you trim the effective stroke by -5 to 0 mm. It is not an air cushion. We confirm allowable side-load and exact dimensions from the datasheet on request.